[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY PART II, SECTION 3, SUB-
SECTION (i)]
GOVERNMENT OF INDIA
MINISTRY OF FINANCE
(DEPARTMENT OF REVENUE)
Notification No. 21/2025-Customs (ADD)
New Delhi, the 26
th
June, 2025
G.S.R. ---(E).- Whereas in the matter of “Plastic Processing Machines” (hereinafter referred to as the
subject goods) falling under tariff items 8477 10 00 or 8477 90 00 of the First Schedule to the Customs Tariff Act,
1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR
and Taiwan (hereinafter referred to as the subject countries), and imported into India, the designated authority in
its final findings vide notification No. 06/09/2024-DGTR, dated the 27
th
March, 2025, published in the Gazette of
India, Extraordinary, Part I, Section 1, dated the 27
th
March, 2025, read with corrigendum dated 26
th
June, 2025,
has, inter alia come to the conclusion that—
(i) the subject goods have been exported to India from the subject countries at dumped prices;
(ii) the domestic industry has suffered material injury on account of dumped imports from subject
countries;
(iii) the material injury has been caused to the domestic industry by the dumped imports of subject
goods from the subject countries,
and has recommended imposition of an anti-dumping duty on the imports of subject goods, originating in, or
exported from the subject countries and imported into India, in order to remove injury to the domestic industry.
Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the
Customs Tariff Act read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of
Anti-dumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government,
after considering the aforesaid final findings of the designated authority, hereby imposes on the subject goods, the
description of which is specified in column (3) of the Table below, falling under tariff items of the First Schedule
to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the countries as
specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding
entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported
into India, an anti-dumping duty calculated at the rate as specified in the corresponding entry in column (7) of the
said Table, namely:-
Table
S
No.
Tariff Items Description of
the goods
Country of
origin
Country of
export Producer
Duty as
% of CIF
value
(1) (2) (3) (4) (5) (6) (7)
1. 8477 10 00
or
8477 90 00
Plastic
Processing
Machinery
China PR Any
country
including
China PR
Dongguan Fu Chun Shin Plastic Machinery
Manufacture Co., Ltd. and Fu Chun Shin
(Ningbo) Machinery Manufacture Co., Ltd
48%
2. -do- -do- China PR Any
country
including
China PR
Chen Hsong Machinery Co Ltd, Chen Hsong
Sales & Marketing (Shenzhen) Co., Ltd, Chen
Hsong Machinery (Ningbo) Co., Ltd., Chen
Hsong Machinery (Shenzhen) Co., Ltd, Foshan
Shunde Chen De Precision Machinery Co., Ltd.,
Foshan Shunde Chen De Plastics Machinery
Co., Ltd
27%
3. -do- -do- China PR Any
country
including
China PR
Yizumi Precision Molding Technology Co.,
Ltd., Yizumi High Speed Packaging Technology
Co., Ltd, Yizumi Precision Machinery (HK) Co.,
Limited, Yizumi Precision Machinery (Suzhou)
Co., Ltd
35%
4. -do- -do- China PR Any
country
including
China PR
Husky Injection Molding Systems Shanghai Ltd 0%
5. -do- -do- China PR Any
country
including
China PR
Any producer other than producers mentioned at S
No. 1,2,3 and 4 above
63%
6. -do- -do- Any country
other than
China PR and
Taiwan
China PR Any producer 63%
7. -do- -do- Taiwan
Any
country
including
Taiwan
Chen Hsong Machinery Taiwan Co., Ltd. 39%
8. -do- -do- Taiwan
Any
country
including
Taiwan
Huarong Plastic Machinery Co., Ltd 0%
9. -do- -do- Taiwan Any
country
including
Taiwan
Any producer other than producers mentioned at
S No. 7 and 8 above
53%
10. -do- -do- Any country
other than
China PR and
Taiwan
Taiwan
Any producer 53%
Note 1: The product under consideration in the present investigation is Plastic Processing Machines (PPM) or
Injection Moulding Machines, also known as injection presser, used for processing and moulding of plastic
materials.
Note 2 : The scope of the product under consideration includes all kinds of plastic processing or injection
moulding machines, having a clamping force not less than 40 tonnes and not more than 1500 tonnes. The scope
of the product under consideration includes machines in fully assembled, semi knocked down (SKD), complete
knocked down form (CKD), or a combination of SKD & CKD. The scope is further clarified below –
a. A plastic processing machine in semi knocked down stage shall mean a plastic processing machine which
is not fully assembled but is transacted as a plastic processing machine with parts or sub-assemblies not
fitted together and the machine is not ready to use. A semi knockdown machine shall also imply sub-
assemblies namely clamping/clamp unit, injection unit with or without screw & barrel, machine base frame
and fabrication frames/covers imported for injection moulding machine.
b. A plastic processing machine in completely knocked down stage shall mean a plastic processing machine
in its incomplete or unfinished form, has the essential character of the complete machine when put together,
and contains all components required for assembling the machines.
Note 3 : The following products are specifically excluded from the scope of the product under consideration: -
a. Blow moulding machines classified under tariff item 8477 30 00 under the Customs Tariff Act, 1975;
b. Vertical injection moulding machines;
c. All electric injection moulding machines wherein the mechanical movements such as injection, moulding
closing, moulding opening, ejection, screw-drive etc. are controlled by independent servo motors and
having digital control system and without hydraulic unit;
d. Multi-colour/multi-mould machinery for making footwear, rotary injection moulding machinery for
making footwear and footwear sole/strap/heel injection moulding machine classified under the Custom
Tariff Act, 1975 under sub heading 8453;
e. Second hand/used plastic processing machines;
f. Imports of any standalone parts/components, other than those specified above;
g. Imports of clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and
fabrication frames/covers imported for production of a machine other than injection moulding machines;
Note 4: The customs classification is indicative only and not binding on the scope of the product under
consideration.
2. The anti-dumping duty imposed under this notification shall be levied for a period of five years (unless
revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette,
and shall be payable in Indian currency.
Explanation. – For the purposes of this notification,
(a) rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate
which is specified in the notification of the Government of India, in the Ministry of Finance (Department of
Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962
(52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation
of the bill of entry under section 46 of the said Act.
(b) "CIF value" means assessable value as determined under section 14 of the Customs Act, 1962 (52 of
1962).
[F. No. 190354/52/2025-TRU]
(Dheeraj Sharma)
Under Secretary to the Government of India
