132 GI/2022 	(1) 
रजिस्ट्री सं. डी.एल.- 33004/99 	REGD. No. D. L.-33004/99 
  
  
 
xxxGIDHxxx 
xxxGIDExxx 
असाधारण  
EXTRAORDINARY 
भाग II—खण् ड 3—उप-खण् ड (ii)  
PART II—Section 3—Sub-section (ii) 
प्राजधकार से प्रकाजित 
PUBLISHED BY AUTHORITY 
 
 
रसायन और उर्वरक मंत्रालय 
(रसायन एर्ं पेरोरसायन जर्भाग) 
अजधसूचना 
नई ददल्ली, 7 िनर्री, 2022 
का.आ.88(अ).— के न्द्रीय सरकार की, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 के साथ पठित 
धारा 25 की उप-धारा (3), जिसे इसके पश्चात उक्त अजधजनयम कहा गया है, द्वारा प्रदत्त िजक्तयों का प्रयोग करते हुए,भारतीय मानक 
ब्यूरो के साथ परामिव करने के पश्चात, यह राय है दक लोकजहत में ऐसा करना आर्श्यक या समीचीन है, इसके द्वारा एदिलोजनराइल-
ब्यूटाडीन स्ट्टाइरीन (एबीएस) (गुणर्त्ता जनयंत्रण) आदेि, 2021 में संिोधन करने के जलए र्ह जनम्नजलजखत आदेि करती है, अथावत्- 
1. संजिप्त नाम, प्रारंभ और लागू होना - (1) इस आदेि को एदिलोजनराइल-ब्यूटाडीन स्ट्टाइरीन (एबीएस) (गुणर्त्ता जनयंत्रण) संिोधन 
आदेि, 2022 कहा िाएगा। 
(2) यह रािपत्र में उसके प्रकािन की तारीख को प्रर्ृत्त होगा। 
2. एदिलोजनराइल-ब्यूटाडीन स्ट्टाइरीन (एबीएस) (गुणर्त्ता जनयंत्रण) आदेि, 2021 में, पैरा 4 की सारणी को जनम्नानुसार 
प्रजतस्ट्थाजपत दकया िाएगा:  
 
सं.   86] 	नई ददल्ली, िुिर्ार, िनर्री 7, 2022/पौष 17, 1943  
No.  86] 	NEW DELHI, FRIDAY, JANUARY 7, 2022/PAUSHA  17, 1943   सी.जी.-डी.एल.-अ.-07012022-232494
CG-DL-E-07012022-232494
2  	THE GAZETTE OF INDIA : EXTRAORDINARY   [PART II—SEC. 3(ii)] 
माल या र्स्ट्तुएं भारतीय मानक  भारतीय मानक का नाम 
(1) 	(2) 	(3) 
एदिलोजनराइल ब्यूटाडीन 
स्ट्टाइरीन  
(एबीएस) 
आईएस 17077:2019/ 
आईएसओ 19062-1: 2015 
प्लाजस्ट्टक – मोल्ल्डग और एक्सट्रूज़न सामग्री के जलए 
एदिलोजनराइल-ब्यूटाडीन स्ट्टाइरीन (एबीएस) भाग 1 नाजमत 
प्रणाली और जर्जनदेि के जलए आधार 
[फा. सं. पीसी-II 46016/6/2020-टेक.सीपीसी] 
कािी नाथ झा, संयुक्त सजचर् 
नोट: मुख्य आदेि ददनांक 13 जसतंबर, 2021 की अजधसूचना संख्या का.आ. 3927 के द्वारा भारत के रािपत्र, असाधारण, भाग-II, खंड 
3, उप-खंड ii में प्रकाजित दकया गया था। 
 
MINISTRY OF CHEMICALS AND FERTILIZERS 
(Department of Chemicals and Petrochemicals) 
NOTIFICATION 
New Delhi, the 7th  January, 2022 
S.O.88(E).—In exercise of the powers conferred by section 16 read with Sub-section (3) of section 25 
of the Bureau of Indian Standards Act, 2016 (11 of 2016), (hereinafter referred to as the said Act), the Central 
Government after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to 
do in the public interest, hereby makes the following Order to amend the Acrylonitrile Butadiene Styrene (ABS) 
(Quality Control) Order, 2021, namely:- 
1. Short title, commencement and application. — (1) This order may be called the Acrylonitrile- Butadiene 
Styrene (ABS) (Quality Control) Amendment Order, 2022. 
(2) It shall come into force on the date of its publication in the Official Gazette.  
2. In the Acrylonitrile- Butadiene Styrene (ABS) (Quality Control) Order, 2021, the Table in para 4, shall be 
substituted as under:  
Goods or articles Indian Standard  Title of Indian Standard  
(1) 	(2) 	(3) 
Acrylonitrile Butadiene 
Styrene (ABS)  
IS 17077 :2019/ ISO 19062-1 : 
2015 
Plastic - Acrylonitrile - Butadiene styrene (ABS) 
Moulding and Extrusion Materials Part 1 Designation 
System and Basis for Specification  
 [F. No. PC-II 46016/ 6/2020-Tech.CPC] 
KASHI NATH JHA, Jt. Secy. 
Note: The principle order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub section (ii) 
vide notification number S.O. 3927 Dated 13
th
 September,2021. 
 
 
अजधसूचना 
नई ददल्ली, 7 िनर्री, 2022 
का.आ.89(अ).— के न्द्रीय सरकार की,  भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 के साथ पठित 
धारा 25 की उप-धारा (3), जिसे इसके पश्चात उक्त अजधजनयम कहा गया है, द्वारा प्रदत्त िजक्तयों का प्रयोग करते हुए, भारतीय मानक 
ब्यूरो के साथ परामिव करने के पश्चात, यह राय है दक लोकजहत में ऐसा करना आर्श्यक या समीचीन है, इसके द्वारा पॉलीयुरेथेनेस 
(गुणर्त्ता जनयंत्रण) आदेि, 2021 में संिोधन करने के जलए र्ह जनम्नजलजखत आदेि करती है, अथावत्- 
1. संजिप्त नाम, प्रारंभ और लागू होना - (1) इस आदेि को पॉलीयुरेथेनेस (गुणर्त्ता जनयंत्रण) संिोधन आदेि, 2022 कहा िाएगा। 
 (2) यह रािपत्र में उसके प्रकािन की तारीख को प्रर्ृत्त होगा।
[भागII—खण् ड 3(ii)]	भारत का रािपत्र : असाधारण 	3 
2. पॉलीयुरेथेनेस (गुणर्त्ता जनयंत्रण) आदेि, 2021 में, पैरा 4 की सारणी को जनम्नानुसार प्रजतस्ट्थाजपत दकया िाएगा:  
माल या र्स्ट्तुएं भारतीय मानक  भारतीय मानक का नाम 
(1) 	(2) 	(3) 
पॉलीयुरेथेनेस आईएस 17397 (भाग 1): 2020/ 
आईएसओ 16365-1: 2014 
प्लाजस्ट्टक – मोल्ल्डग और एक्सट्रूज़न सामग्री के जलए थमोप्लाजस्ट्टक 
पॉलीयुरेथेनेस भाग 1 नाजमत प्रणाली और जर्जनदेि के जलए आधार 
[फा. सं. पीसी-II 46016/6/2020-टेक.सीपीसी] 
कािी नाथ झा,संयुक्त सजचर् 
नोट: मुख्य आदेि ददनांक 13 जसतंबर, 2021 की अजधसूचना संख्या का.आ. 3931 के द्वारा भारत के रािपत्र, असाधारण, भाग-II, खंड 
3, उप-खंड ii में प्रकाजित दकया गया था। 
 
 
NOTIFICATION 
New Delhi, the 7th January, 2022 
S.O.89(E).—In exercise of the powers conferred by section 16 read with Sub-section (3) of section 25 
of the Bureau of Indian Standards Act, 2016 (11 of 2016), (hereinafter referred to as the said Act), the Central 
Government after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to 
do in the public interest, hereby makes the following Order to amend the Polyurethanes (Quality Control) Order, 
2021, namely:- 
1. Short title, commencement and application. — (1) This order may be called the Polyurethanes (Quality 
Control) Amendment Order, 2022. 
(2) It shall come into force on the date of its publication in the Official Gazette.  
2. In the Polyurethanes (Quality Control) Order, 2021, the Table in para 4, shall be substituted as under :  
Goods or articles Indian Standard  Title for Indian Standard  
(1) 	(2) 	(3) 
Polyurethanes IS 17397 (Part 1) : 2020/ ISO 
16365-1 : 2014 
Plastic – Thermoplastic Polyurethanes for Moulding and 
Extrusion Materials Part 1 Designation System and Basis 
for  Specification 
 [F. No. PC-II 46016/ 6/2020-Tech.CPC] 
KASHI NATH JHA, Jt. Secy. 
Note : The principle order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub section (ii) 
vide notification number S.O. 3931 Dated 13
th
 September,2021. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 
and Published by the Controller of Publications, Delhi-110054.