Goods imported for the manufacture of excisable goods - concessional rate of duty.
28-2-1999
Notification No. 25/99-Customs
In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central
Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods specified in column
(3) of Table below, and falling under the Chapters of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) specified
in the corresponding entry in column (2) of the said Table, when imported into India for use in the manufacture of the finished
goods specified in the corresponding entry in column (4) of the said Table, from so much of that portion of the duty of customs
leviable thereon which is specified in the said First Schedule, as is in excess of the amount calculated at the rate of, -
(a) 5% ad valorem in the case of the imported goods specified in List A;
(b) 15% ad valorem in the case of the imported goods specified in List B; and
(c) 25% ad valorem in the case of the imported goods specified in List C:
Provided that the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for
Manufacture of Excisable Goods) Rules, 1996.
Table
S.No. Chapter Description of imported goods Description of finished goods
(1) (2) (3) (4)
1.
LIST A
15,29,32, 34,39,48,
70
Alpha cellulose paper/cotton paper; Electrical grade kraft
paper; Tung oil; Volan/Silane treated glass fabric/cloth
Copper clad laminates phenolic or
paper phenolic or glass ep-oxy
types; composite type copper clad
laminates; printed circuit boards.
2.
25,28,40, 56,70,84,
85
Potassium carbonate/Pottasium Nitrate(prilled); Barium
carbonate; Pumice powder; Cerium oxide; Anode buttons;
Necks and Neck tubings; Wool felt; Spodumene
Glass shell/parts of television picture
tube.
3.25,28,40, 70, 84, 85
Strontium carbonate; garnet powder; stud pins; Titanium
dioxide; sodium antimonate; rubber sleeve
Class shells/parts for colour picture
tubes.
4. Omitted
5.28
High purity gases : Argon; halocarbon-14; halocarbon-116;
halocar-bon-23; helium; silicon tetra-chloride; sulphur
hexafluoride; chlorine; silane; hydrochloric acid; phosphine &
silane mixture; boron trichloride; dichlorosilane; diborane;
hydrogen bromide; phosphine in nitrogen; nitrous oxide;
boron trifluoride; arsine & arsine mixture; phosphine in
hydrogen; hydrogen; nitrogen
Integrated circuits, Semi- conductor
devices.
6.28,29
High purity chemicals:
Acetic acid MOS/CMOS grade; Sulphuric acid MOS/ CMOS
grade; Hydrochloric acid MOS/CMOS grade; Buffered oxide
etchant MOS/ CMOS grade; Ammonium fluoride
MOS/CMOS . grade; Trichloro-ethylene MOS/ CMOS grade;
Isopropyi alcohol MOS/CMOS grade; Acetone MOS/CMOS
grade; Hydrofluoric acid MOS/ CMOS grade; Nitric acid
MOS/CMOS grade; Phos-phoric acid MOS/CMOS grade;
Hydrogen peroxide MOS/ CMOS grade
Integrated circuits, Semi-conductor
devices.
7.28,29,38, 76
Cadmium sulphide; cadmium telluride; silicon dioxide;
cadmium chloride; zinc telluride; indium; germane; disilane;
phosphine; hydrogen fluoride; aluminium sputtering target;
zinc oxide sputtering target, adhesive coated aluminium foil;
high purity hydrogen high purity nitrogen; high purity argon;
copper doped graphite paste; high purity methane; diborane
in high purity helium
Solar cells/modules.
8.28,29,32 38,39,68 74
., Copper plating salts, their i, brighteners, levellers, condi
tioners, replenishers, stabi lizers; Black Oxide Coating
(Microtech) solution/ salts, predip solution/salts, palladium
catalyst solution/ salts
Printed Circuit Boards.
9.28,29,32 38,71
Resistive, Conductive, Di-electric, Overglaze or solder
pastes, compositions or inks in packing not exceeding 20
kg.
Hybrid Microcircuits;
Potentiometers; Resistors (other
than heating resistors); Ceramic and
Mica Capacitors; Conductive
Rubber Switches/Key Boards.
10.
28,29,32,
39,48,69,
74,85
Ceramic bodies (coated or uncoated); bandoliering tape with
or without adhesives; solder plated copper wire of dia. upto 1
mm; solder plated brass wire of dia. upto 1 mm; high melting
point solder alloy; paper backed polyurethane tape; epoxy
marking ink with or without hardner/thinner
Thermistors.
11.28,29,34 Resist stripper
Semi-conductor devices, printed
circuit boards.
12.
28,29,34,
85
Special materials:
Surfactant, tetra ethyl-ortho-silicate (TEOS); trimethyl borate
(TMB); trimethyl phosphite (TMPI); trichloroethane (TCA);
dichloroethylene; sputtering targets; photo resist primer;
edge bead remover
Integrated circuits, Semi-conductor
devices.
13.28,29,37
Photo resist & associated thinners or/and developers;
photospin glass
Semi-conductor devices, printed
circuit boards.
14.28,29,38 Electrolyte
Etched or Formed Aluminium Foil,
Electrolytic Capacitors.
15.28, 29,38
Dopants or doping sources in all forms, and with or without
precious metal constituents
Semi-conductor devices.
16.
28,29,38,
39
Epoxy/Epoxide resins/ Epoxy moulding powder, compounds
or encapsulants; Fillers, thinners, hardeners, accelerators
and fire retardants
Capacitors; Semi-conductor
Devices; Light Emitting Diodes;
Moulded Piezoelectric Crystals;
Liquid Crystal Displays; Electronic
Valves and Tubes; Switches;
Copper clad laminates of glass
epoxy/paper expoxy type; composite
type copper clad laminates; Delay
lines; Line and Wave Traps;
Potentiometers; Silicon Crystals or
Silicon wafers; Connectors;
Resistors (other than heating
resistors); Deflection parts;
Loudspeakers; Magnetic Heads;
Paper Cones/ Spiders/Dust Caps
for Loudspeaker; Hybrid
Microcircuits; Printed parts.
17.28, 32
Ferric Oxide of purity of 99% and above; Manganous
Manganic Oxide of purity of 99% and above; Manganese di-
oxide of purity of 99% and above, Manganous Oxide; Nickel
Oxide; Strontium Carbonate
Ferrites.
18.
28,38,39,
70, 74,76
Aluminium paste; ethylene vinyl acetate sheets (EVA); primer
for EVA; Crane glass; tedlar coated aluminium sheet;
phosphorous oxychloride; halo carbon (CF4)/Freon gas;
tinned copper interconnect; toughened glass with low iron
content and transmittivity of min. 90% and above;
multilayered sheets with tedlar base; fluro polymer resin; ultra
high purity (UHP) silane in UHP nitrogen; UHP silane;
diborane in UHP silane; MOCVD grade phosphine in UHP
silane; silver sputtering target; high purity tin tetrachloride;
nitrogen trifluoride of 99% purity and above
Solar cells/modules.
19.
28,39, 68,
73
Blue steel lapping carriers/lapping carriers; lapping vehicles;
lapping abrasive powder; lapping compound
Mounted piezoelectric crystals;
Printed Circuit Boards; Semi-
conductor devices; Potentiometers;
Resistors (other than heating
resistors); Connectors; Switches;
Relays; Tape deck mechanism;
Magnetic heads; Deflection parts;
DC micromotor upto 13.5 V not
exceeding 20 Watt rating; Silicon in
all forms, LED lamps and displays..
20.
28,29, 81,
85
Tantalum powder; Tantalum wire; CM Seals; Cans; Silver
powder suspension; Manganese Nitrate; Heat shrinkable
polyester tubing
Tantalum capacitors.
21.
28,48,69, 75,78,81,
84
Lead based ceramic composition; Magnesium titanate
based ceramic composition; Neodium based ceramic
composition; Alumina setters/slabs; Lint free paper/paper
towels/filter paper; Zirconia milling media/high alumina
tumbling media; Steel shots - copper plated hollow; Nickel
and sulphonic acid based plating chemicals; Razer
blades/doctor blades
Ceramic dielectric (multilayer)
capacitors.
22.28, 68
Tantalum Neodyme oxide; Neodyme oxide; Strontium
carbonate
Ceramic Capacitors.
23.
28,70,73,
75, 85
Crystal Holders; Bases; covers; Glass Bulbs; Glass Bases;
Nickel Eyelets; Springs; Solder wire 25 SWG or thinner;
Chromium Pellets
Mounted Piezoelectric crystals.
24.28, 81
Tungsten rhenium wire; Suspension of aluminium oxide in
binder; Suspension of tungsten powder and aluminium oxide
in binder; Triple carbonate suspension of calcium, barium,
strontium in binder
Electron guns and electron gun
parts.
25.29 Tetra Bromo Bisphenol-A; Tricresyl/Aryl Phosphate
Copper clad laminates for Printed
Circuit Boards.
26.32 Electron Phosphor Electronic Valves and Tubes
27.32 Desmearing agents Printed Circuit Boards.
2832,35,39
Silicone based resins, oils, varnishes, lacquers, elastomers,
with or without additives
Semi-conductor Devices; Liquid
Crystal Displays; Electronic Valves
and Tubes; Resistors (other than
heating resistors); Connectors;
Magnetic Tape; Relays;
Potentiometers; Switches; Capacitor
grade metallised plastic film;
Piezoelectric crystal; Hybrid Micro
circuits.
29.32,37, 39
Solder Mask/Resist in ink or film form, with or without
associated catalysts
Printed Circuit Boards.
30.32,38
Screen printing inks, dyes, emulsions, lacquers, films
(including sensitisers, hardners, catalysts)
Semi-conductor devices, printed
circuit boards, potentiometers,
capacitors, hybrid microcircuits,
printed parts, coils and inductors,
resistors (other than heating
resistors).
31.32, 38 Internal Dag Electronic Valves and Tubes.
32.35, 39 Polyamide coatings or adhesives
Semi-conductor devices; Heat sinks;
deflectioii parts.
3337 Photo Polymer Film
Printed Circuit Boards; Liquid
Crystal Displays.
3437, 39
High resolution, high contrast photographic films and photo
stencil films; DIAZO (C6H5N2) films
Printed Circuit Boards; semi-
conductor devices; hybrid
microcircuits.
35.37, 70 High Resolution Photo Plates; Photomask Substrates
High Resolution Photo Masks; Semi-
conductor devices; Liquid Crystal
Displays; Silicon Single Crystals or
Wafers.
36.37, 70 High resolution photo mask
Semi-conductor devices; Printed
Circuit Boards; Liquid Crystal
Displays.
37.38 Silicon in the form of undiffused wafers, discs or chips Semi-conductor devices.
38.38,39, 76 Polyvinyl flouride (TEDLAR); Tedlar Aluminium Tedlar Solar cells/modules.
39.38, 81 Lithium niobate wafers Hybrid microcircuits.
40.38, 85
Silicon in the form of diffused wafers, discs or chips (with or
without molybdenum disc)
Hybrid microcircuits or semi-
conductor devices.
41.38, 85 Getters Electronic valves and tubes.
42.39 Glass epoxy or/and polyamide prepregs
Multilayer Printed Circuit Boards;
copper clad laminates.
43.39 Silicone rubber
Keypad switches; parts of EHT
transformers.
44.39
Plastic Film Capacitors or Mixed Dielectric Capacitors, other
than Power Capacitors.
Plastic Film Capacitors; Mixed
Dielectric Capacitors.
45.39
Nylon 6.30% glass filled, flame retardant moulding
powder/granules and with or without other additives
Potentiometers; connectors.
46.39
Plain and glass filled nylon/polyamide with or without other
additives
Relays; Potentiometers; tape deck
mechanism; connectors.
47.39 Polypropylene moulding powder / granules Deflection parts; Cassettes.
48.39 Polybutylene terephthalate
Connectors; deflection parts;
switches; relays.
49.39 Heat shrinkable PVC sleeving, tubing, film or ring Capacitors; relays; deflection parts.
50.39 Polyurethane lapping pads
Mounted piezoelectric crystals;
Printed Circuit Boards/semi-
conductors devices; potentiometers;
resistors (other than heating
resistors); connectors; switches;
relays; tape deck mechanisms;
magnetic heads; deflection parts;
DC Micromotors upto 13.5 volts and
not exceeding 20 watts rating silicon
(in all forms).
51.39 Plain polystyrene film
Plain film capacitors; mixed
dielectric capacitors.
52.39
Plain plastic film (other than Polystyrene film) of thickness 12
microns or below
"Explanation.- For the removal of doubt, "plan plastic film"
includes Biaxially Oriented Polypropylene (BOPP) film;
Electronic capacitor grade
metallised dielectric plastic film.
53.39 Release film for multilayer laminates Printed Circuit Boards.
54.39, 40
Polyvinyl Alcohol, Polyisobutylene, Chlorosulphona ted
Polyethylene (HYPALON)
Ferrites.
55.39, 43
Antistatic materials in the form of tubes, strips, mats, covers,
bins, boxes, containers
Semi-conductor devices. Hybrid
microcircuits.
56.39,48,59, 85
Insulating/taping material (including pocket carrier tape) in
tape, roll or strip form with or without adhesive
Capacitors; deflection parts;
resistors (other than heating
resistors); semi-conductor devices;
inductors.
57.39,48,85 Domes or Dust caps; Paper/Plastic cones Loudspeakers.
58.39,48,85 Parts of Potentiometers Potentiometers.
59.39, 59, 73
Screen mesh of stainless steel/polyester/metallised
polyester/metallised nylon (in sizes of mesh 60 or above)
Ceramic capacitors.
60.
39, 69,
73,85
Ceramic/alumina substrates Potentiometers; printed parts.
61.39, 73, 79,85 Parts of magnetic sound heads Magnetic sound heads.
62.39,74
Copper clad laminates laminated to nylon, teflon, polyester;
Aluminium clad entry foil and back up laminates
Printed Circuit Boards.
63.39,85
Polyethylene terephthalate film with ferro magnetic coating of
thickness upto 0.005 inch with magnetic coating 50 to 180
microinch
Floppy diskettes.
63A.39,73 Moulded shell with liner, Steel hub ring, spring, shutter Floppy diskette (3.5" size).
64.39,85 Parts/articles of silicone, Elastomer or Silicone rubber
Liquid Crystal Displays; Semi-
conductor Devices; EHT
Transformers; Potentiometers;
Electrolytic Capacitors; Solid
tantalum capacitors.
65.39,85
Formers, bases, bobbins; Holders, brackets; Shielding
cases,cans
RF/IF coils or transformers or
deflection parts.
66.40,59 Bungs; Rubber pinch rollers with or without plastic bush
Electrolytic capacitors; tape deck
mechanisms.
6740, 84,85
Parts of Rotor Assembly; Commutator assembly or parts
thereof; Brush assembly or parts thereof
DC Micromotors upto 13.5 volts and
not exceeding 20 watts rating.
68.40, 85
Anode assembly consisting of EHT cable, silicone rubber
cap and contact spring or parts thereof (EHT cable in cut
pieces or running length)
Deflection parts.
69.48 Electrolytic Capacitor/Condenser Tissue paper
Electrolytic Capacitors; Plastic Film
Capacitors.
70.48,76 Kraft paper/tissue paper or aluminium foil for voice coil Loud-speakers (cone type).
7159 Felt sheet (fully compressed) of 1.5 mm thickness and belowTape deck mechanism.
72.69, 78,85
Headers; Caps with or without leads; Cans with or without
leads; Pins; Stud seals; Lead beads; Ceramic beads;
Ceramic-glass packages; Cap to Lead Assembles; Ceramic
Pipes; Lead frames, single or in roll form; Housings; Brass
ring
Semi-conductor devices; Light
Emitting Diodes; Resistors (other
than heating resistors); Capacitors;
Connectors; Hybrid Microcircuits;
Printed parts.
73.69, 85
Alumina rods and bars (with Alumina content above 90%) in
coated or uncoated form; Ceramic plates/flats/cases/
bases/formers; Steatite rods and bars in coated or uncoated
form
Resistors (other than heating
resistors); Semi-conductor Devices;
Hybrid Microcircuits; Electron Guns
and Electron Gun parts.
74.69,85 Ceramic dielectric (coated or uncoated) Ceramic capacitors.
75.70 Glass filament yam
Silane treated glass cloth/fabric for
use in the copper clad laminates.
76.32,70,85
Glass frit or glass powder; Glass preforms or pellets; Glass
tubes
Liquid Crystal Displays; semi-
conductor devices; Electronic valves
and tubes (other than television
picture tubes/cathode ray tubes);
Glass to metal seals; Lead frames;
Transistor headers; Reed relays or
Reed switches; delay lines; resistors
(other than heating resistors);
mounted piezoelectric crystals;
electron guns and electron gun parts;
gas discharge tubes.
77.70, 85 Fused Quartzware
Semi-conductor devices; silicon in
all forms.
78.71 Synthetic quartz crystal blocks and blanks Mounted Piezoelectric crystals.
79.71
Contact tape with pure Nickel base and Crown Gold alloy;
Contact tape with solder Diamond Back in fine silver;
Contact tape in silver or silver alloy with or without palladium
with Gold overlay
Relays; Switches.
80.71
Gold in the form of wire, ribbon, preform of purity 99.99 %
and above
Semi-conductor devices; Light
Editing Diodes.
81.71, 72, 75,80 Nickel plated steel strip; tin silver antimony alloy Semi-conductor devices.
82.71, 76, 85
Aluminium wire with silicon or magnesium impurity of upto
2%; gold wire with phosphorous or antimony doping
Semi-conductor devices.
83.72
CRNGO silicon steel strip /sheet/coil/hoop with or without tin
plating
DC Micromotor; Potentiometer;
Resistors.
84.72
Coated/uncoated electro-galvanised CRCA/ mild steel/
stainless steel in the form of sheet / strip /wire/coils
DC Micromotor; tape deck
mechanism.
85.72,73 Iron of 99.7% purity and above Cast Alloy Permanent Magnets.
86.72, 73, 75,81 Nickel Iron Cobalt Alloy in all forms
Semi-conductor devices; electronic
valves and tubes; transistor headers;
glass to metal seals/lead frames;
cast alloy permanent magnets;
hybrid microcircuits; gas discharge
tubes.
87.72 or 73
Copper clad tin coated steel wire, dia 0.4 mm to 1.2 mm/
solder plated Copper cover steel wire (SPC).
Lead tabs for electrolytic capacitors.
88.73,85 Metal clad substrates in any form with or without tags
Potentiometers; Hybrid
microcircuits; Printed parts; semi-
conductor devices; Light Emitting
Diodes.
89.74 Electrolytic Tough Pitch (ETP) Copper wire rods Lead wire for electronic parts.
9074
Solder plated/unplated brass-strips upto 100 mm width;
silver plated brass strips upto 100 mm width
Potentiometers/parts of
potentiometers; connectors/parts of
connectors; switches/parts of
switches; relays/parts of relays
91.74
Phosphor Bronze Sheets/ bars/ section/ flats/
strips/wire/rods/foils/ pipes, with or without plating
Relays/parts of relays; Tape Deck
Mechanism; connectors/parts of
connectors; potentiometers/parts of
potentiometers; Heat Sinks;
cassettes; parts of cassettes;
T.V.Tuner; telescopic antenna; gas
discharge tubes/parts of gas
discharge tubes.
92.74
Beryllium Copper rods/ strips/sheets/wire/foils with or without
plating; Rectangular Profile Brass material(CuZn39Pb2)
" Connectors/parts of connectors;
relays/parts of relays; switches/parts
of switches; gas discharge
tubes/parts of gas discharge tubes.
93.74 Tin coated/solder plated copper wire Resistors.
94.74
Continuous cast copper wire rod/copper scrap, electrolytic
grade of purity 99.9% or above
Copper foil for copper clad
laminates.
95.74, 76, 85
Copper-cadmium braided wire/Self-soldering/self-bonding
aluminium wire
Loudspeakers; microphones.
96.74,85
Oxygen-free high conductivity (OFHC) Copper base with
weldable steel ring
Semi-conductor devices.
97.74,85
OFHC copper wires, bars, rods, angles, shapes and
sections, plates, sheets, strips, tubes and pipes
Semi-conductor devices; electronic
valves and tubes; transistor headers;
glass to metal seals; capacitors.
98.74,85
Rayon or Silk cover Litz wire of the following sizes -(a) 6, 8,
12 and 24 strands with each strand diameter 0.03 mm; (b) 6
or 9 strands with each strand diameter 0.04 mm
RF/IF Coils or transformers.
99.74,85 Parts made of OFHC copper
Semi-conductor devices, electronic
valves & tubes, transistor headers,
glass to metal seals, capacitors.
100.76 Etched or formed Aluminium Foils Electrolytic Capacitors.
101.76 Plain Aluminium foil containing more than 99% Aluminium
Etched or formed Aluminium foil;
electrolytic capacitors or plastic film
capacitors.
102.76
Aluminium of purity 99% or above in the form of wire, strips,
sheets, rods, bars, pipes, plates, sections, ribbons or shapes
Cans or Leads for Electrolytic
Capacitors; Semi-conductor
Devices; Light Emitting diodes;
Capacitors; Capacitor grade
Metallised Plastic films;
Potentiometers; Disc covers for
electrolytic capacitors.
103.81 Cobalt Cast Alloy Permanent Magne ts.
104.81 High purity chromium powder (99.99% and above)
Semi-conductor devices, Mounted
piezo electric crystals, electronic
valves and tubes, vacuum interrupter
tubes.
105.81,85
Molybdenum and molybdenum alloys, wrought, in all forms
and articles and parts thereof
Electronic Valves and Tubes; X-ray
tubes; Semi-conductor Devices;
Mounted Piezoelectric Crystals.
106.84,85 Parts of Vacuum Interrupter Tubes Vacuum Interrupter Tubes.
107.85
Self bonding/Self soldering insulated or enamelled copper
wire
Deflection parts; Loudspeakers;
Relays; Magnetic Heads; RF/IF
Coils ; Transformers(other than
Power transformers) and DC
Micromotors upto 13.5 volts and not
exceeding 20 watts rating; electronic
tuner.
108.85 Parts of gas discharge tubes Gas discharge tubes.
109.85
Light Emitting Diodes in the form of Chips, wafers or undiced
discs
Light Emitting. Diodes; Lamps and
Displays.
110.85 Parts of Cathode Ray Tubes (other, than Glass parts) Cathode Ray Tubes.
111.85 Lead Tabs/Paddle Tabs Electrolytic Capacitors.
112.85 Parts of Relays, Switches, Connectors Relays; Switches; Connectors.
113.85 Parts of electron Guns
Electron Guns, Television picture
tubes or Cathode Ray Tubes.
114.85 Casings of aluminium Electrolytic capacitors.
115.85 Parts of CD-Deck Mechanism CD Deck Mechanism.
116.85 Parts of Fly-back Transformer Flyback Transformers.
117.85 Parts of Tuners TV Tuners.
118.85 Parts of Data Cartridge Data Cartridge.
119.85 Parts of transmitting tubes Transmitting tubes.
120.85
Parts of deflection yoke (DY), excluding colour deflection
yoke core
Deflection parts.
121.75,85, 90
Nickel and nickel alloys, wrought in all forms and articles
thereof
Semi-conductor Devices; Liquid
Crystal Displays; Electronic valves
and tubes; Pick-up cartridges; Stylii;
X-Ray Tubes; Cast Alloy Permanent
magnets; Transistor Headers; Glass
to metal seals; Lead frames;
Resistors (other than heating
resistors); Magnetic Heads;
Potentiometers; Electron guns and
electron gun parts; Electro-magnetic
shields; Encoders and synchros.
12239,74,75,76
Composite copper clad materials consisting of Paper +
Epoxy + Glass cloth
Printed Circuit Boards
12374
Glass Epoxy Copper clad laminates or Paper Phenolic
Copper clad laminates
Printed Circuit Boards
12474 Copper foils(plain or adhesive coated)
Copper clad laminates (phenolic or
glass epoxy types);composite type
copper clad laminates; multi-layer
Printed Circuit Boards
12528,29,38,72,74,84
Cupric Chloride Etchant; Ammonical Etchants; Solid Carbide
Drills; Routers; Hot Air Levelling Flux; Electroless Copper
Plating Solution; Sensitisers; Activators; Post Activators;
Copper foil of refined copper; Colloidal / Semi colloidal
Graphite (Shadow)
Printed Circuit Boards
12628,29,39,68,71,81,82
Plastic Film for Wafer Dicing; Graphite Jigs / Block/ Rods /
Plates; Dicing blades / wheels; Tungsten filament and or
parts thereof; Tungsten Wire / Rod; Colour Paste and
Diffusants; Silver conductive paste / Suspension; Palladium
Wire; n- Butyl Acetate; Bonding Tools
LED/LED Displays; Semiconductor
Devices; Hybrid Microcircuits;
Mounted Piezo Electric Crystals;
Resistors; Potentiometers
12770,85
Parts of data graphic display tubes(colour), with a phosphor
dot screen pitch smaller than 0.4mm
Data graphic display tubes(colour),
with a phosphor dot screen pitch
smaller than 0.4mm
12870,75 Glass Tubes/ Insulators/ Spacers; Nickel Eyelets Mounted piezo electric crystals
12939
Diallylphthalate (DAP) Moulding Powder or Compound (Plain
or Glass/Fiber filled with or without additives)
Connectors; Switches with contact
rating less than 5 amperes at voltage
not exceeding 250 Volts AC or DC;
Potentiometers; Relays of contact
rating upto 7 amperes; Resistors
13039 Polyvinyl Chloride Film/Sheet Floppy Disks/Diskettes
13128,38,39
Gold plating make up and replenisher solutions and salts;
Resins for gold recovery
Semiconductor devices; LED/LED
Displays; Connectors; PCBs
13274
Solder Plated Annealed Copper Wire (SCA) of diameter
0.4mm to 1mm
Plastic film capacitors
13379
Zinc of purity 99% or above in Rod, Wire or Strip form; Zinc
Wire / Zinc- Aluminum wire with dia up to 5mm ; Tin - zinc
wire with dia upto 3mm
Electronic Capacitor Grade
Metallised Plastic Film / Capacitors
13480 Tin Foil/ Tin Alloy Foil
Plastic Film Capacitors; Resistors
(other than heating resistors)
13576 Aluminium wire (of purity 99.9% or above ) of dia upto 3mm
Lead Wires/Lead Tabs for
electrolytic capacitors; Electronic
Capacitor grade Metallized Plastic
film; Plastic film capacitors;
semiconductor devices
13628 Barium Carbonate Ceramic Capacitors
13738,39,69
Hydroxy Propyl Methyl Cellulose Barium Titanate based or
Lead Titanate based Ceramic composition / Powder
Ceramic Capacitors, Ceramic
Substrates /Rods/ Discs / Dielectric
13828
Magnesium Oxide (Purity not less than 98%); Zinc Oxide
(Purity not less than 98%); Nickel Oxide (Purity not less than
98%); Aluminium Oxide (Purity not less than 99.9%);
Vanadium Pentoxide (Purity not less than 99.9%); Lithium
Carbonate (Purity not less than 99%); Manganese
Carbonate (Purity not less than 98%); Bismuth Oxide (Purity
not less than 99%); Cobalt Oxide (Purity not less than 99%);
Copper Carbonate (Purity not less than 98%); Chromium
Oxide (Purity not less than 98%); Indium Oxide (Purity not
less than 99%); Dysprosium oxide (Purity not less than 99%);
Gadolinium Oxide (Purity not less than 99%);Yttrium Oxide
(Purity not less than 99.9%); Calcium Carbonate (Purity not
less than 98%) ; Tin Oxide (Purity not less than 98%);
Magnesium Carbonate (Purity not less than 99%); Iron Oxide
(Purity not less than 99%); Barium Carbonate (Purity not less
than 99%)
Resistors; Ceramic Capacitors
13939,48,59
Resin -VAGH Co-Polymerised Vinyl Chloride Vinyl Acetate,
Pressure Sensitive felt, with or without adhesive,Silicon
Coated/ Carbonized silicon paper
14039 Polyimide Film (Kapton)
14139 Modified Polyphenylene Oxide
14239 Phenolic Moulding Powder/ Resin
14372,74
Lead wires of Iron or non alloy steel plated or coated with
other base metals
Lead Tabs
14429,72,74,76, 85
Copper alloy resistance wire and strips; Steel or Aluminium
in substrate or sheet form; Butyl DiGol
14581 Metal alloy targets
Resistors; Resistor Grade Metallized
Ceramic Cores
14685 Chip Transistors; Varicap Diodes
Tuners; Modulators; Hybrid Micro
Circuits
14774 Cladded Copper/ Copper Alloy Strip / Foil
Switches with contact rating less
than 5 amperes at voltage not
exceeding 250 Volts AC or DC;
Connectors
14828
Zinc Oxide (Purity minimum 99.5%);Strontium Oxide/
Strontium Carbonate; Zinc Stearate (Purity minimum 99%);
Polyvinyl alcohol (PVA); Polyvinyl Butyral (Ash Content max
1%)
Pre-Calcined Ferrite Powder (Spray
Dried); Resistors
14928
Zirconium Oxide (Purity not less than 99%); Tin Oxide (Purity
not less than 99%); Lanthanam Oxide (Purity not less than
99%); Zinc Oxide (Purity not less than 98%); Polystyrene
(Purity not less than 98%); Magnesium Oxide (Purity not less
than 98%); Calcium Carbonate (Purity not less than 98%);
Tantalum Oxide (Purity not less than 99%); Barium
Carbonate (Purity not less than 99%)
Microwave Dielectrics; Ceramic
Capacitors; Resistors ; Varistors;
Thermistors
15039 Phenolic Moulding Powder / Resin
Hybrid Micro circuits;
Potentiometers; Ceramic
Capacitors; Thermistors; Varistors ;
Switches with contact rating less
than 5 amperes at voltage not
exceeding 250 Volts AC or DC;
Connectors
15139,69 Guide Ceramic; Guide LCP (Liquid Crystal Polymer) Print heads
15285 Parts of Loudspeaker Loudspeakers
15374,85
High Voltage Rectifier Diodes; Focus Potmeter; Electrolytic
Tough Pitch Wire/Rods/Formed Pins/parts made thereof
Deflection Components
15439 Polycarbonate (Plain or glass filled moulding powder)
Resistors; Potentiometers; Switches
with contact rating less than 5
amperes at voltage not exceeding
250 Volts AC or DC
15539 Poly Vinyl Acetate
Resistors; Potentiometers; Hybrid
Micro Circuits
15672
Nickel Iron (low carbon / gas free grade) in Sheet or strip
form / EB Welded Triple Metal Strips./ Controlled Expansion
Alloy Strips
Resistors; Potentiometers ;
15739 SRBP (Synthetic Resin Bonded Paper) Substrates
Potentiometers; Switches with
contact rating les than 5 amperes at
voltage not exceeding 250 Volts AC
or DC
15825 Ball Clay
Ceramic Cores / Substrates for
resistors
15932 Borosilicate Glass Powder
Parts of Electron Gun / Multiform
Bead Glass Rods
16074
Unplated Brass Strips in Coil form 70 mm width; Phosphor
Bronze Strips in Coil Form
Connectors
16172,74
Bimetal sheets in coil forms / piece parts; Copper clad steel
sheets in coil forms / piece parts
Relays of contact rating upto 7
amperes
16228,29
Ammonium Dihydrogen Phosphate ; Ammonium
pantaborate
Electrolytic Capacitors
16338 Carbon / Flurographite Powder Potentiometers
16428,34
Boron Nitride Suspension ; Metallisation Inhabitation Fluid
(Oil)
Electronic Capacitor Grade
metallised Plastic Film/ Plastic Film
Capacitors
16529 Dowanol PX-16S (Non- CFC solvent)
Flyback Transformers / Focus
Resistors
16628,29,38,48
Monoalkylethers of ethylene glycol.; Flux 1544 ;Ammonium
Hydroxide (CMOS Grade); Ammonia (NH3) (CMOS Grade);
Lid perform; Chemcassette
Semiconductor devices
16776 Etched Aluminium Foil
Formed Aluminium Foil for
electrolytic capacitors.
16828, 39 Dyes; Optical grade polycarbonate; Jewel box CD-R (unrecorded CD)
LIST B
1.28 Litharge
Glass shells/parts for colour picture
tubes.
2.28 Gamma Ferric Oxide Magnetic Inks or Magnetic Tape.
3.38 Precalcined / Pre-sintered ferrite powder Ferrites
4.
58,69,84,
85
Molybdenum Silidde/ Molybdenum disilicide heating elements; conveying
trays; saggers
Ferrites
5. Omitted vide Notification No.26/2002 dt.01.03.2002
6. Omitted vide Notification No.26/2002 dt.01.03.2002
7. Omitted vide Notification No.26/2002 dt.01.03.2002
LIST C
1.Omitted
2.Omitted
3.Omitted
4.Omitted
5.70
TV Glass bulbs/shells; CRT Glass Bulbs/shells; Magnetron Glass
bulbs/shells
Television picture tubes. Cathode Ray tubes or
magnetrons.
6.70Glass parts for colour picture tubes (excluding neck or reneck tubes)Colour picture tubes.
7.70
Parts of TV/CRT Glass bulbs/shells including panels, funnels. Glass
tubes (excluding neck or reneck tubes)
TV Glass bulbs/shells for TV picture tube or CRT
Glass bulbs/shells for CRT.
870Neck or reneck tubes CRT Glass bulbs/shells for CRT.
9.Omitted
10.Omitted
Notification No. 25/99-Cus., dated 28-2-1999 as amended by Notification No. 60/99-Cus., dated 11-5-1999 , No. 20/2000-
Cus., dated 1-3-2000 No. 54/2000-cus., dated 4-5-2000. No. 20/2001-Cus, dated 01-03-2001, Notification No.26/2002
dt.01.03.2002 and Notification No 57/2002-cus dated 31-5-2002 and Notification No. 108/2002-Cus., dated 10-10-2002.
