Download Document

के न्‍द्रीय्मुहर विभाग्– III

हमारा संदर्भ- के न्‍द्रीय् विभ्ग -३/टी.्ई.्डी./्स न्‍दय् ्् ् २६्फभ भी्२०२१

ग षय: व्िील्भी ्पभ् विभ ांकन्से्सांबन्न्‍दित्ब भ्ब भ्पूछे्ज ने् ले्प्रश्न्

उपरोक्त विषय से संबन्धित प्रशनािली एिं उनके उत्तर सर्ी के सूचनार्भ संलग्न है।


(राके श कुमार)
िैज्ञाननक ‘डी’ (के मु वि III)

प्र वख्(के् व्ग ्III)

सर्ी संबंधितों को बी आई एस िेबसाइट के माध्यम से पररचाललत





CENTRAL MARKS DEPARTMENT -III

Our Ref: CMD-III/TED/General 26 Feb 2021

Subject: Frequently Asked Questions (FAQs) on Marking on wheel Rims under the ambit
of Automobile Wheel Rim Component (Quality Control) Order, 2020

FAQs along with their replies on the above subject are attached for information to all
concerned.




(Rakesh Kumar)
Scientist ‘D’ (CMD III)
Head (CMD - III)

Circulated to all concerned through BIS website

Frequently Asked Questions (FAQs)
Wheel Rims under the ambit of Automobile Wheel Rim Component (QC) Order, 2020

1. Is each product required to be marked with BIS Standard Mark ?

Each product shall be marked with the Standard Mark, as specified in Annexure-II of
Scheme-I of Schedule-II of BIS CA Regulations, 2018. To view the Regulation, please
visit BIS website www.bis.gov.in and follow following path: About us>> BIS Act,
Rules and Regulations>>The Bureau of Indian Standards (Conformity Assessment)
Regulations, 2018

2. What should be the design of the Standard Mark?

The design of Standard Mark shall be identical to the facsimile given in the licence
document issued by BIS Branch Office at the time of grant of licence.

3. Is decrease or increase in size of Standard Mark permitted?

The photographic enlargement or reduction of the Standard Mark in relative proportions
given in Annexure-II of Scheme-I of Schedule-II of BIS (Conformity Assessment)
Regulations, 2018, is permitted.

4. What should be the manner of marking the Standard mark?

The Standard Mark shall carry the licence number and reference to the Indian Standard
in a visible manner and shall be as specified in the licence document. IS Number
(e.g. IS 9436) appears at the top of the Standard Mark and Licence number
(e.g. CM/L- XXXXXXXXXX) appears beneath the Standard Mark. In case the licence
number cannot be placed beneath the Standard Mark, it shall be suitably placed close
to the Standard Mark in a linear manner. All the markings shall be legible, indelible,
non-removable and durable.

For the above purpose, marking of each detail i.e. IS number, Standard Mark and
Licence number on separate spokes of rim is not acceptable.

5. What are the markings required to be done on product?

In addition to the BIS Standard Mark, the product details as per the requirements given
in the respective Indian Standard (i.e. IS 9436 or IS 9438 or IS 16192 (Part 1) or
IS 16192 (Part 2) or IS 16192 (Part 3) or the applicable Standards cross-referred therein
(i.e IS 1694 (Part 1)), shall be marked on the product in accordance with the respective
Indian Standard. This may include Size Designation , Name or Trade-Mark of the
Wheel Rim Manufacturer , Date of Manufacturing, Rim Bead Seat Contour Type, if
applicable etc.

The marking details shall contain reference to the website of the Bureau
(i.e. www.bis.gov.in) so that a consumer may verify the authenticity of the standard
marked product. The marking of reference to BIS website can be marked on package.

6. What should be the location of marking or can the marking be done on inside?

BIS Standard Mark shall be marked in accordance with the respective Indian Standard.
The various situations of marking based on the types of the rims are detailed in IS 10694
(Part 1), which is referred in the main product standard i.e. IS 9436 or IS 9438 or
IS 16192 (Part 1) or IS 16192 (Part 2) or IS 16192 (Part 3) etc. Accordingly, marking
should be done as per Clause 4 of IS 10694 (Part 1): 2009 in various situations covered
under the clause.