BIS ISI Certification

  • Overview
  • Benefits
  • Document Required
  • Fees And Timeliness
  • Process To Apply
  • FAQs

how it works

ISI/BIS Certification, also known as Indian Standards Institution (ISI) certification or Bureau of Indian Standards (BIS) certification, is a quality certification program in India.

Overview of BIS ISI Certification

This certification is governed by the BIS, a statutory body established under the Bureau of Indian Standards Act 1986. Its primary purpose is to ensure the quality, safety, and reliability of products sold in India. BIS/ISI Certification encompasses a wide range of product categories, including electronics, appliances, food products, and industrial goods.

Manufacturers seeking BIS/ISI Certification must ensure that their products comply with specific quality and safety standards set by the BIS. This typically involves rigorous testing at BIS-recognized laboratories to verify that the products meet the prescribed Indian standards. Upon successful compliance, the products are granted BIS/ISI certification, which is marked by the ISI mark. This ISI mark serves as visible proof of conformity with Indian standards and signifies product reliability.

BIS/ISI Certification is often a mandatory requirement for products sold in India, and non-compliance can lead to legal consequences, including product confiscation, fines, and legal actions against manufacturers. Manufacturers, both domestic and international, should consider BIS/ISI Certification an essential requirement to enter and succeed in the Indian market.

It assures consumers of product quality and safety, fostering confidence in the products and enhancing market access for manufacturers. To maintain certification, manufacturers must continually adhere to BIS standards, including undergoing periodic audits and testing to ensure ongoing compliance.

Following products are covered under Compulsory Registration Scheme:

S.No. Product Name IS Standard
1 1,3 Phenylenediamine IS 17450:2020
2 100 Percent Polyester Spun Grey and White Yarn (PSY) IS 17265:2023
3 18 Percent Nickel Maraging Steel Bars and Rods IS 14652: 1999
4 3(N, N-DiEthyl) Aminophenol IS 7686:2020
5 A- twill Jute Bag IS 1943:1995
6 A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 IS 16444 : Part 1 : 2015
7 A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S IS 16444:Part 2:2017
8 AC Motor Capacitors IS 2993: 1998
9 AC Static Transformer operated Watt-hour and VAR-hour meters, class 0.2S and 0.5S IS 14697:2021
10 AC static watt-hour meters, class 1 and 2 IS 13779:2020
11 AC watt-hour meters, class 0.5, 1 and 2 IS 13010: 2002
12 Acetic Acid IS 695: 2020
13 Acetone IS 170: 2020
14 Acid Oil IS 12029:1986
15 Acrylonitrile IS 12540:2023
16 Acrylonitrile Butadiene Styrene (ABS) IS 17077:Part 1:2022
17 Aerial Bunched Cables-For Working Voltages Up to and Including 1100 Volts-Specification IS 14255:1995
18 Air Filters for general ventilation IS 17570 (Part 1):2021 ISO 16890-2:2016
19 All rubber gum boots and ankle boots IS 5557 (Part 2):2018
20 Alloy Steel billets, blooms and slabs for forging for general engineering purposes IS 4368:1967
21 Alloys for Internal Combustion Engine Valve Applications - Specification IS 7494 : 2023
22 Alloys used in Electrical Resistance Metallic Heating Elements IS 12045:1987
23 Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class 1 and 2) IS 15884:2010
24 Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications IS 7902:2001
25 Aluminium alloy tube for irrigation purposes – extruded tube IS 7092 (Part 2):1987
26 Aluminium alloy tubes for irrigation purposes -welded tubes IS 7092 (Part 1):1992
27 Aluminium and Aluminium Alloy Bare Foil for Food Packaging IS 15392:2003
28 Aluminium and aluminium alloy foil for pharmaceutical packaging IS 16011:2012
29 Aluminium Beverage Cans IS 14407:2023
30 Aluminium composite panel IS 17682:2021
31 Aluminum alloy ingots for remelting for general engineering purpose IS 6754:1972
32 Aluminum ingots billets and wire bars (EC GRADE) IS 4026:2023
33 Aniline, Technical IS 2833: 2019
34 Antiriot shoes IS 17037:2018
35 Appliances for electric instantaneous water heaters IS 302 (Part 2/Sec 35): 2017
36 Appliances for stationary storage type electric water heaters IS 302 (Part 2/Sec 21): 2018
37 Asbestos Cement Building Boards IS 2098:1997
38 Asbestos Cement Cable Conduits and Troughs IS 8870:1978
39 Asbestos Cement Flat Sheets IS 2096:1992
40 Asbestos Cement Pressure Pipes (Light Duty) IS 9627:1980
41 Asbestos Cement Pressure Pipes and Joints IS 1592:2003
42 Asbestos–Cement Pipes and Fittings for Sewerage and Drainage IS 6908:1991
43 Automotive Vehicles Tubes for pneumatic tyres IS 13098: 2012
44 Automotive vehicles-Pneumatic tyres for commercial vehicles-Diagonal and radial ply IS 15636: 2022
45 Automotive vehicles-Pneumatic tyres for passenger car vehicles-Diagonal and radial ply IS 15633: 2022
46 Automotive vehicles-Pneumatic tyres for two and three-wheeled motor vehicles IS 15627: 2022
47 Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials IS 15155 : 2020
48 Bayonet Lamp Holders IS 1258: 2005
49 Bead Wires for Tyres IS 4824:2006
50 Bed sheet and Pillow Cover IS 17630 : 2021
51 Beta Picoline IS 16112: 2013
52 Bitumen Drums IS 3575:1993
53 Block Boards IS 1659:2004
54 Boric Acid-Specification IS 10116: 2015
55 Bottled water dispensers IS 17681:2022
56 Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations IS 14772: 2020
57 Braided Nylon Ropes for Mountaineering Purposes IS 6590:1972
58 Bright steel bars-Specification IS 9550:2001
59 B-twill Jute bags for packing foodgrains IS 2566:1993
60 Bullet Resistant Jackets IS 17051:2018
61 Butterfly Valves for general purpose IS 13095:2020
62 Cabinet hinges IS 18297:2023
63 Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling IS 14927 (Part 2): 2001
64 Canvas Boots Rubber Sole IS 3736:1995
65 Canvas Shoes Rubber Sole IS 3735:1996
66 Carbon and Carbon-Manganese Free-Cutting Steels IS 4431: 1978
67 Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used In Defence Servicess IS 14698:1999
68 Carbon steel billets, blooms, slabs and bars for forgings IS 1875:1992
69 Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose IS 2830:2012
70 Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality)-Specification IS 2831 : 2012
71 Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races-Specification IS 4398: 1994
72 Cast aluminum and its alloys – Ingots and castings for general engineering purposes IS 617:1994
73 Cast iron man hole covers and frames IS 1726:1991
74 Cast iron single faced thimble mounted sluice gates IS 13349:1992
75 Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series IS 1729:2002
76 Caustic Soda-Specification IS 252:2013
77 Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage IS 8329 : 2000
78 Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage IS 1536:2023
79 Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories IS 3989:2009
80 Chrome molybdenum steel bars and rods for aircraft purposes IS 963: 1958
81 Clinical thermometers Part 1-Solid stem type IS 3055 (Part-1): 1994
82 Clinical thermometers Part 2-Enclosed scale type IS 3055 (Part-2): 2004
83 Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame IS 15742 : 2007
84 Coconut Fatty Acids IS 12069:1987
85 Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose IS 513 (Part-1): 2016
86 Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel IS 513(Part-2):2016
87 Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) IS 648:2022
88 Cold Rolled Steel Strips (Box Strappings) IS 5872:1990
89 Cold-Reduced And Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling IS 9485: 1980
90 Cold-reduced Electrolytic Chromium or Chromium oxide-coated steel IS 12591: 2018
91 Cold-reduced Electrolytic Tin Plate IS 1993 : 2018
92 Cold-Reduced tinmill products-Blackplate IS/ISO 11951 : 2016
93 Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages or Retainers-Specification IS 4397: 1999
94 Cold-Rolled Stainless Steel Strips for Razor Blades IS 9294:2023
95 Composite Cement-Specification IS 16415: 2015
96 Compounded Feeds for Cattle IS 2052:2023
97 Condensed milk, partly skimmed and skimmed condensed milk IS 1166: 2022
98 Continuous (Piano) hinges IS 3818:1992
99 Continuously Pre-Painted Galvanized Steel Sheet and Coils IS 14246:2013
100 Copper IS 191:2007
101 Copper Rods and Bars for Electrical Purposes IS 613:2000
102 Copper rods and bars for general engineering purposes IS 4171:1983
103 Copper strip for electrical purposes IS 1897:2008
104 Copper Tubes for plumbing- Specification IS 14810:2000
105 Copper Wire Rods for Electrical Applications IS 12444:2020
106 Copper wires for general engineering purposes IS 4412:1981
107 Corrugated Aluminium Sheet IS 1254:2007
108 Corrugated and Semi – Corrugated Asbestos Cement Sheets IS 459:1992
109 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel IS 814 : 2004
110 Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V IS 7098 (Part 1):1988
111 Cross-linked polyethylene insulated Thermoplastics sheathed cables-Part 3 For Working Voltages from 66kV up to and including 220 kV IS 7098 (Part 3):1993
112 Crosslinked polyethylene insulated Thermoplastics sheathed cables-Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV IS 7098 (Part 2):2011
113 Curtains and Drapes IS 15741: 2007
114 Cycle and Rickshaw Pneumatic Tyres IS 2414:2005
115 Cycle-Rubber Tubes (Moulded or Jointed) IS 2415 :2015
116 Dental Bib or Napkins IS 17354 : 2020
117 Derby shoes IS 17043:2018
118 Diagnostic Medical X Ray Equipment IS 7620 (Part-1): 1986
119 Diesel Engines – NOx Reduction Agent AUS 32 IS 17042 (Part-1):2018
120 Disposable baby diaper IS 17509 : 2021
121 Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer IS 4250:1980
122 Domestic Gas Stoves for use with Liquefied Petroleum Gases IS 4246:2002
123 Domestic Gas Stoves for use with Piped Natural Gas (PNG) IS 17153:2019
124 Domestic Pressure Cooker IS 2347:2017
125 Domestic Stainless steel vacuum flask/bottle IS 17526:2021
126 Door closers (pneumatically regulated) for light doors weighing up to 40 kg IS 6343:1982
127 Door closers, concealed type (hydraulically regulated) IS 14912:2001
128 Door Handles IS 208:2020
129 Door handles for mortice lock (vertical type) IS 4992:1975
130 Double-acting spring hinges IS 453:1993
131 Drums Large, Fixed Ends – Grade A IS 1783 (Part 1) :2014
132 Drums, Large Open Top IS 13997:2014
133 Drums, Large, Fixed Ends – Grade B IS 1783 (Part 2) :2014
134 Ducted and Package Air Conditioners IS 8148:2018
135 Ductile iron fittings for pressure pipes for water, gas and sewage IS 9523:2000
136 EC Grade Aluminium Rod produced by Continuous Casting and Rolling IS 5484:1997
137 Elastomer Insulated Cables (Part-1) for working voltages up to and including 1100 V IS 9968 (Part-1): 1988
138 Elastomer Insulated Flexible Cables for Use in Mines-Specification IS 14494:2019
139 Electric Cable for Photovoltic Systems for rated voltage 1500V DC IS 17293:2020
140 Electric Ceiling Type Fans IS 374:2019
141 Electric Immersion Water Heaters IS 368: 2014
142 Electric immersion water heaters-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-201): 2008
143 Electric stoves-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-202): 1992
144 Electric Toys IS 15644:2006
145 Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations IS/IEC 60898-1: 2015
146 Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips : IS 17404 : 2020
147 Endless V-Belts for Industrial Purposes–fire resistant and antistatic V-Belts IS 2494 (Part 2): 1993
148 Endless V-Belts for Industrial Purposes-General Purpose IS 2494 (Part 1): 1994
149 Energy Efficient Induction Motors-Three Phase Squirrel Cage IS 12615 : 2018
150 Ether IS 336:2021
151 Ethyl Acrylate IS 14708:1999
152 Ethylene Dichloride IS 869:2020
153 Ethylene Glycol IS 5295:2023
154 Ethylene Vinyl Acetate (EVA) Copolymers IS 13601:1993
155 Evaporative Air Coolers (Desert Coolers) IS 3315:2019
156 Expanded Metal Steel Sheets For General Purposes IS 412: 1975
157 Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures IS 10238 : 2001
158 Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts IS 12427 : 2001
159 Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh IS 17358 (Part 1) : 2020
160 Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns IS 17358 (Part 2) : 2020
161 Ferrochromium IS 1170:1992
162 Ferromanganese IS 1171:201
163 Ferrosilicon-Specification IS 1110 : 2023
164 Ferrules for water services IS 2692:1989
165 Fibre Cement Flat Sheets IS 14862:2000
166 Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding : IS 14871:2000
167 Finned type Heat Exchanger for Room Air Conditioner : IS 11329:2018
168 Fire resistant Steel-Specification IS 15103: 2002
169 Fire retardant plywood IS 5509 : 2021
170 Flame and Induction Hardening Steels IS 3930: 1994
171 Flat Transparent Sheet Glass IS 2835:1987
172 Flexible Water Storage Tank for Agriculture and Horticulture Purposes IS 17729 : 2021
173 Floor springs (hydraulically regulated) for heavy doors IS 6315:1992
174 Flush Bolts IS 5187: 1972
175 Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel IS 15769:2008
176 Flux Cored Solder Wire IS 1921: 2005
177 Follow-up Formula Complementary Foods IS 15757: 2022
178 Food for Special Medical Purpose intended for Infants - Specification IS 17945: 2022
179 Footwear for men and women for municipal scavenging work IS 16994:2018
180 Forged or Rolled CTC Segments IS 8748: 1978
181 Freezer IS 7872:2020
182 Fusion bonded epoxy coated reinforcing bars IS 13620:1993
183 Galvanized Steel Barbed Wire for Fencing IS 278:2009
184 Galvanized steel sheets (plain and corrugated) IS 277:2018/2022
185 Galvanized Steel Wire or Galvanized Steel Wire with polymer coating IS 16014:2018
186 Galvanized Structural Steel IS 16732:2019
187 Gamma Picoline IS 16113: 2013
188 Geogrids for flexible pavements IS 17371:2020
189 Geogrids used in reinforced soil retaining structures IS 17373:2020
190 Geosynthetics - Geocells - Specification Part 1 Load Bearing Application IS 17483 (Part 1): 2020
191 Geosynthetics - Geocells - Specification Part 2 Slope Erosion Protection Application IS 17483 (Part 2): 2020
192 Geotextiles for permanent erosion control in hard armor systems IS 16392 : 2015
193 Geotextiles used as protection (or cushioning) materials IS 16090:2013
194 Geotextiles used in sub-grade separation in pavement structures IS 16391 : 2015
195 Geotextiles used in Sub-grade Stabilisation in pavement structures IS 16362:2020
196 Geotextiles used in Subsurface Drainage Application IS 16393 : 2015
197 Glass beakers IS 2619:2018
198 Glass Feeding Bottles IS 5168: 2018
199 Glass Fibre Reinforced Gypsum Panels IS 17400:2021
200 Graduated measuring cylinders IS 878 :2008
201 Grain oriented electrical steel sheet and strip (CRGO) IS 3024:2015
202 Grey iron castings IS 210:2009
203 Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards IS 2095 (Part 2): 2022
204 Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles IS 2095 (Part 3):2022
205 Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards IS 2095 (Part 1):2011
206 Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets IS 17730 (Part 2) : 2021
207 Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets IS 17730 (Part 1) : 2021
208 Half Round Mild Steel Wire for The Manufacture of Split Pins IS 8563: 1977
209 Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V-Specification IS 17048:2018
210 Hand held Blender IS 302(Part2/Section 14):2009
211 Hard Drawn Steel Wire for Upholstery Springs IS 2589: 1975
212 Harvest nets for agriculture and horticulture purposes : IS 17357 : 2020
213 HDPE or PP Woven Sacks for filling Sand IS 14252:2015
214 HDPE or PP Woven Sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg Food Grains IS 16208:2015
215 HDPE or PP Woven Sacks for packaging 50 kg Food Grains IS 14887:2014
216 HDPE or PP Woven Sacks for packaging 50 kg or 25 kg Sugar IS 14968:2015
217 Heald Wire IS 8565: 1977
218 Heat Resisting Steels IS 9516:1980
219 Heat-Treated Steels Alloy and Free-Cutting Steels-Ball and Roller Bearing Steels IS 17111:2019 (ISO 683-17:2014)
220 Helmet for riders of Two Wheeler Motor Vehicles IS 4151:2015
221 Hermetic Compressor-Specification IS 10617:2018
222 Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) IS 1363 (Part 3) : 2018
223 Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) IS 1363 (Part 1) :2019
224 Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) IS 1364 (Part 1) : 2018
225 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) IS 1364 (Part 2) : 2018
226 Hexagon Head Screw (Size ranges from M 5 to 64) IS 1363 (Part 2) :2018
227 High Alumina Cement for Structural Use IS 6452: 1989
228 High Alumina Refractory Cement IS 15895: 2018
229 High ankle tactical boots with PU-Rubber sole IS 17012:2018
230 High Carbon Steel Wire Rods IS 7904:2017
231 High Density Polyethylene (HDPE) Geomembranes for lining IS 16352 : 2020
232 High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System IS 17728 : 2021
233 High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose IS 16190 : 2014
234 High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system IS 16627:2017
235 High Density Polyethylene (HDPE) woven beds for vermiculture IS 15907:2010
236 High Strength deformed stainless steel bars and wires for concrete reinforcement IS 16651 : 2017
237 High strength deformed steel bars and wires for concrete reinforcement - Specification IS 1786:2008
238 High Strength Structural Bolts IS 3757 : 1985
239 High Strength Structural Nuts IS 6623 : 2004
240 High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder IS 15914:2011
241 High visibility Warning Clothes IS 15809 : 2017
242 High-purity primary aluminum ingot for remelting for special applications IS 11890:1987
243 Hot Dip aluminum-Zinc alloy metallic coated steel strip and sheet (Plain) IS 15961:2012
244 Hot Dip Galvanized Stay Strand IS 2141:2000
245 Hot Rolled bars for production of bright bars and machined parts for engineering applications IS 7283:1992
246 Hot Rolled Carbon Steel Sheet and Strip IS 1079: 2017
247 Hot Rolled Carbon Steel Strip For Cold Rolling Purposes IS 11513:2017
248 Hot rolled medium and high tensile structural steel IS 2062:2011
249 Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes IS 5986: 2017
250 Hot rolled steel narrow width strip for welded tubes and pipes IS 15647:2006
251 Hot Rolled Steel Plate (upto 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders IS 6240: 2008
252 Hot Rolled Steel Plates Sheets and Strips for Manufacture of Agricultural Discs IS 9442: 1980
253 Hot Rolled Steel Strip for Welded Tubes and Pipes IS 10748:2004
254 Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement IS 12594: 1988
255 Household and similar electrical appliances – Safety – particular requirements for fans IS 302 (Part 2/Sec 80):2017
256 Household Refrigerating Appliances-Characteristics and Test Methods Part-1 General Requirements IS 17550:Part 1:2021
257 Household Zig-Zag Sewing Machine Head IS 15449:Part1:2004
258 Hubless centrifugally cast (Spun) iron pipes, fittings and accessories-Spigot series IS 15905:2011
259 Hydraulically Regulated Door Closers IS 3564:1995
260 Hydrogenated Rice Bran Fatty Acids IS 12361:1988
261 Hydrophobic Portland Cement IS 8043: 1991
262 Indented wire for Pre-stressed concrete IS 6003:2010
263 Indicating Bolts for use in public baths and lavatories IS 4621 : 1975
264 Industrial and protective rubber knee and ankle boots IS 5557:2004
265 Industrial safety helmets IS 2925:1984
266 Infant milk substitutes IS 14433: 2022
267 Insect nets for Agriculture and Horticulture purpose IS 16513:2016
268 Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas IS 15558:2005
269 Insulated Container for Food Storage IS 17569:2021
270 Insulated Flask for Domestic Use IS 17790 : 2022
271 Insulating Mats for Electrical Purposes IS 15652:2006
272 ISI / BIS Certification is mandatory for IS 710 : 2010
273 Jute Agro textiles for Growth of Plants and Suppression of Weeds IS 17070 : 2019
274 Jute bags for packing 50 Kg foodgrains IS 12650:2018
275 Jute bags for packing 50 Kg sugar IS 15138:2010
276 Jute bags for packing up to 30 Kg foodgrains IS 16372:2015
277 Jute Geotextiles Part 1 Strengthening of Sub-Grade in Roads IS 14715 (Part 1): 2016
278 Jute Geotextiles Part 2 Control of Bank Erosion in Rivers and Waterways IS 14715 (Part 2): 2016
279 Key locks for security equipment IS 17566: 2021
280 Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining IS 15351:2015
281 Laminated Woven Orchard Protection Covers IS 17731 : 2021
282 Lauric Acid IS 10931:1984
283 Leather safety boots and shoes for heavy metal industries IS 1989 (Part 2):1986
284 Leather safety boots and shoes for miners IS 1989 (Part-1):1986
285 Leather safety footwear having direct moulded rubber sole IS 11226:1993
286 Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole IS 14544:2022
287 Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures IS 1269(Part 1) : 1997
288 Legal Metrology-Material Measure of length-Steel tape measures IS 1269(Part 2) : 1997
289 Light Alloy Wheel Rims IS 16192 (Part-1):2014
290 Light weight jute sacking bags for packing 50 Kg foodgrains IS 16186:2014
291 Lighters- Safety Specifications IS/ISO 9994:2018
292 Linear Alkyl Benzene IS 12795:2020
293 Liquefied petroleum gas containers for automotive usec IS 14899: 2014
294 Live Working Gloves of Insulating Material IS 13774:2021
295 Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables IS 3975:1999
296 Low Heat Portland Cement IS 12600: 1989
297 Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Appliances-Specification IS 15997:2012
298 Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures IS 9798: 2013
299 Magnetic materials-specification for individual material-Fe based amorphous strip delivered in the semi-processed state IS 16585 : 2023
300 Maleic Anhydride, Technical IS 5149:2020
301 Malleable cast iron pipe fittings IS 1879:2010
302 Malleable iron shots and grits for use in foundries-Specification IS 9139: 2023
303 Masonry Cement IS 3466: 1988
304 Medium density fibre boards for general purpose IS 12406:2021
305 Methanol (Methyl Alcohol) IS 517: 2020
306 Methyl Acrylate IS 14707:1999
307 Methylene Chloride (Dichloromethane) IS 4566:2020
308 Microfine Ordinary Portland Cement-Specification IS 16993: 2018
309 Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 1) Mild steel and medium tensile steel bars IS 432 (Part 1):1982
310 Mild steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 2) Hard-Drawn Steel Wire IS 432 (Part 2): 1982
311 Mild steel for metal arc welding electrodes IS 2879:1998
312 Mild Steel Rivet Bars for Ship Building IS 3298: 1981
313 Mild steel sliding door bolts for use with padlocks IS 281 : 2009
314 Mild steel wire for cotter pins IS 10794:1984
315 Mild steel wire for General Engineering purposes IS 280: 2006
316 Mild steel wire rods for general engineering purposes IS 7887:1992
317 Milk Powder IS 1165: 2022
318 Milk-cereal based weaning foods IS 1656: 2022
319 Mini domestic water heater for use with piped natural gas (PNG)s IS 17150: 2019
320 Morpholine IS 12084:2018
321 Moulded plastics footwear-Lined or Unlined polyurethane boots for general industrial use IS 16645:2018
322 Moulded solid rubber soles and heels IS 5676:1995
323 Multi-burner oil pressure stoves IS 2787: 2006
324 Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use IS 15100: 2018
325 Multi-purpose Dry Batteries ( Classification-R03, R6, R14 and R20 ) IS 8144: 2018
326 Narrow-necked boiling flasks IS 1381 (Part 1):2003
327 n-Butyl Acrylate IS 14709:1999
328 Needle punched non-woven geobags IS 16653:2017
329 Nickel Powder IS 7506:1987
330 Non- metal helmet for Police Force IS 9562:1980
331 Non-Electric Toys IS 9873 (Part-1):2019, IS 9873 (Part-2):2017, IS 9873 (Part-3):2020, IS 9873 (Part-4):2017, IS 9873 (Part-7):2017, IS 9873 (Part-9):2017
332 Non-ferrous metal butt hinges IS 205:1992
333 Non-ferrous metal sliding door bolts (aldrops) for use with padlocks IS 2681: 1993
334 Non-Magnetic stainless steel for electrical applications Part-2 Specific requirements for binding wire IS 10632 (Part 2): 1983
335 Non-Magnetic stainless steel for electrical applications Part-3 Specific requirements for sheets, strips and plates IS 10632 (Part 3):1983
336 Non-metal helmet for firemen and civil defence personnel IS 2745:1983
337 Nylon Knitted seamless gloves for tobacco harvesters IS 16390 : 2015
338 Oil pressure stove, offset burner type IS 10109: 2018
339 Oil pressure stoves IS 1342: 2019
340 Oil Well Cement IS 8229: 1986
341 One Mark volumetric flasks IS 915:2012
342 Open Weave Coir Bhoovastra IS 15869 : 2020
343 Ordinary Portland Cement IS 269: 2015
344 Oriented Electrical Steel Sheet and Strip Semi-Processed Type IS 15391:2003
345 Outdoor Type Door Oil Immersed Distribution Transformers upto and including 2500 kVA, 33 kV-Specification Part 1 Mineral Oil Immersed IS 1180 (Part 1): 2014
346 Packaged Drinking Water (Other than Packaged Natural Mineral Water) IS 14543: 2024
347 Packaged Natural Mineral Water IS 13428: 2005
348 Palm Fatty Acids IS 12067:1987
349 Parliament hinges IS 362:1991
350 Particle boards of wood and other lignocellulosic materials (medium density) for general purpose IS 3087:2005
351 Partly skimmed milk powder IS 14542: 1998
352 Personal protective equipment Part-2 Safety Footwear IS 15298 (Part-2):2016
353 Personal protective equipment Part-3 Protective Footwear IS 15298 (Part-3):2018
354 Personal protective equipment Part-4 Occupational Footwear IS 15298 (Part-4):2017
355 Phosphorous Oxychloride, Technical IS 11657: 2020
356 Phosphorous Pentachloride, Technical IS 11744: 2020
357 Phosphorous Trichloride, Pure and Analytical Reagent IS 4581:2021
358 Plain Copier Paper IS 14490:2018
359 Plain Hard-drawn Steel Wire For Pre-stressed Concrete Part 1 Cold Drawn Stress-relieved Wire IS 1785 (Part 1) : 1983
360 Plain hard-drawn steel wire for pre-stressed concrete Part 2 as drawn wire IS 1785 (Part 2) : 1983
361 Plant Support Nets for Agriculture and Horticulture Purposes IS 17513 : 2020
362 Plastic Feeding Bottles IS 14625: 2015
363 Plastics-Thermoplastic Polyurethanes for Moulding and Extrusion-Part 1 Designation System IS 17397 : Part 1 : 2022
364 Plates for Galvanizing Pots IS 8917: 1978
365 Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes IS 1293:2019
366 Plywood for concrete shuttering works – Specification IS 4990 : 2011
367 Plywood for general purposes IS 303:1989
368 Poly Aluminium Chloride IS 15573: 2018
369 Poly Vinyl Chloride (PVC) Geomembranes IS 15909 : 2020
370 Poly Vinyl Chloride (PVC) Homopolymers IS 17658:2021
371 Polycarbonate Moulding And Extrusion Materials Specification IS 14434:2023
372 Polyester Continuous Filament Fully Drawn Yarn (FDY) IS 17261:2022
373 Polyester Industrial Yarn (IDY) IS 17264:2022
374 Polyester Partially Oriented Yarn (POY) IS 17262:2022
375 Polyester Staple Fibres (PSF) IS 17263:2022
376 Polyethylene Material for moulding and extrusion for LDPE, LLDPE and HDPE IS 7328:2020
377 Poly-Laminated aluminium cable wrap IS 16012: 2012
378 Polymeric strip or geostrip used as soil reinforcement in retaining structures IS 17372:2020
379 Polypropylene (PP) Materials for Moulding and Extrusion IS 10951:2020
380 Polypropylene Multifilament woven geobags IS 16654:2017
381 Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications IS 16718 : 2021
382 Polyurethane sole, semirigid IS 13893:1994
383 Polyvinyl chloride(PVC) industrial boots IS 12254:2021
384 Portable Fire Extinguishers IS 15683:2018
385 Portland Pozzolana Cement-Part 2 Calcined clay based IS 1489 (Part-2): 2015
386 Portland Pozzolana Cement-Part1 Fly-ash based IS 1489 (Part-1):2015
387 Portland Slag Cement IS 455: 2015
388 Potable Water Bottles (Copper, Stainless Steel, Aluminum) IS 17803: 2022
389 Potassium Carbonate, Anhydrous IS 7129: 2021
390 Pouch for ammunition and grenades made of disruptive pattern nylon-66 IS 16726 : 2018
391 Power Capacitors of Self-Healing Type for AC Power Systems having Rated Voltage upto 1000V IS 13340 (Part 1) : 2012
392 Precipitated Barium Carbonate, Technical IS 3205:1984
393 Precipitated Barium for Ceramic and Glass Industry IS 12928:1990
394 Prelaminated particle boards from wood and other Lignocellulosic material IS 12823:2015
395 Pre-Painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) IS 15965:2012
396 Primary aluminium ingots for remelting for general engineering purpose IS 2590 : 1987
397 Processed cereal based complementary foods IS 11536: 2022
398 Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications IS 17355:2020
399 Protective clothing for firefighters IS 16890 : 2018
400 Protective clothing for industrial workers exposed to heat IS 15748 : 2022
401 Protective Clothing for use in welding and allied processes IS 16655 : 2017
402 Protective gloves for firefighters IS 16874 : 2018
403 PVC insulated cables for working voltages upto and including 1100 V IS 694:2010
404 PVC sandal IS 6721:2023
405 p-Xylene IS 17370:2023
406 Pyridine IS 8058: 2018
407 Quenched and Tempered Alloy Steel Forgings for Pressure Vessels IS 12145: 1987
408 Rapid Hardening Portland Cement IS 8041: 1990
409 Red Phosphorus IS 2012:2006
410 Refillable Seamless steel gas cylinders Part 1 Normalized steel cylinders IS 7285 (Part-1): 2018
411 Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa IS 7285 (Part-2): 2017
412 Reinforced HDPE membrane for effluents and chemical resistance lining IS 17374:2020
413 Residual current operated circuit breakers for household and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) IS 12640 (Part-1): 2016
414 Residual current operated circuit breakers for household and similar uses-Part 2 Circuit breakers with integral overcurrent protection(RCVOs) IS 12640 (Part-2): 2016
415 Resin treated compressed wood laminates (compregs) – For chemical purposes IS 3513 (Part 2) : 1989
416 Resin treated compressed wood laminates (compregs) – For electrical purposes IS 3513 (Part 1) : 1989
417 Resin treated compressed wood laminates (compregs) – For general purposes IS 3513 (Part 3) : 1989
418 Retro-reflective Devices IS/ISO 6742 (Part-2):2015
419 Reusable Sanitary pad/ Sanitary Napkin/ Period Panties IS 17514 : 2021
420 Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System IS 16240:2023
421 Rice Bran Fatty Acids IS 12068:1987
422 Rim Latches IS 1019:1974
423 Room Air Conditioners-Specification Part 1 Unitary Air Conditioners IS 1391 (Part-1):2023
424 Room Air Conditioners-Specification Part 2 Split Air Conditioners IS 1391 (Part-2):2023
425 Room Heaters-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-30): 2007
426 Round Open Top Sanitary Cans for Foods and Drinks – Tinplate IS 9396 (Part 1) : 1987
427 Round Steel wire for ropes IS 1835:1976
428 Rubber Gaskets for Pressure Cookers IS 7466 :2023
429 Rubber Hawai Chappal IS 10702:2023
430 Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 1 Industrial Application IS 9573(Part 1):2017
431 Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 2 Domestic and Commercial Application IS 9573(Part 2):2017
432 Rubber microcellular sheets for soles and heels IS 6664:1992
433 Rubberseed Fatty Acids IS 12124:1987
434 Safe deposit locker cabinets IS 5244 : 2020
435 Safes IS 550 (Part 1): 2014
436 Safety Glass-Specification Part-1 Architectural, Building and General uses IS 2553 (Part-1):2018
437 Safety Glass-Specification Part-2 For Road Transport IS 2553 (Part-2):2019
438 Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care IS 302 (Part 2/Sec 23):2009
439 Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines IS 302 (Part 2/Sec 75):2018
440 Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines IS 302 (Part 2/Sec 7):2010
441 Safety of household and similar electrical appliances – particular requirements – range hoods IS 302 (Part 2/Sec 31):2009
442 Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances IS 302 (Part 2/Sec 9): 2009
443 Safety of household and similar electrical appliances-Electric iron IS 302 (Part-2/Sec-3): 2007
444 Safety Rubber Canvas Boots for Miners IS 3976:2018
445 Sanitary napkins IS 5405 : 2019
446 Sapling bags for growth of seedling /sapling IS 16089:2013
447 Self Ballasted Lamps for General Lighting Services Part 1-Safety Requirements and Part 2-Performance Requirements IS 15111 (Part-1 & 2): 2002
448 Self-Contained Drinking Water Coolers – Energy Consumption and Performance IS 1475 (Part 1) : 2001
449 Shallow Corrugated Asbestos Cement Sheets IS 13008:1990
450 Sheet Metal Wheel Rims IS 16192 (Part-2):2014
451 Shoe covers IS 17349 : 2020
452 Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets IS 2403 :2014 / ISO 606 : 2004
453 Shunt Power Capacitors of the Non-Self Healing Type for AC System having A Rated Voltage upto and including 1000 V Part 1 General Performance Testing and Rating IS 13585 (Part-1): 2012
454 Silica-Asbestos-Cement Flat Sheets IS 13000:1990
455 Silicomanganese IS 1470: 2013
456 Single volume pipettes IS 1117:2018
457 Skimmed milk-powder, extra grade IS 13334 (Part-2): 2014
458 Skimmed milk-powder, standard grade IS 13334 (Part-1): 2014
459 Sliding locking bolts for use with padlocks IS 7534: 1985
460 Slipper, rubber IS 11544:1986
461 Sodium Formaldehyde Sulphoxylate IS 4505:2015
462 Sodium Sulphide, Technical IS 297: 2001
463 Sodium Tripolyphosphate, Anhydrous, Technical IS 6100:2021
464 Soft Magnetic Iron Rods, Bars Flats and Sections IS 11947: 1987
465 Soft Magnetic Iron Strips IS 11946:1987
466 Solid drawn copper and copper alloy tubes for condensers and heat exchangers IS 1545: 1994
467 Solid drawn copper tubes for general engineering purposes IS 2501:1995
468 Solid PVC soles and heels IS 6719:1972
469 Specification for Carbon manganese steel forgings for pressure vessels IS 12146 : 1987
470 Specification for Carbon Steel Wire for the Manufacture of Wood Screws IS 1812: 1982
471 Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes IS 7226: 1974
472 Specification for Cold rolled steel strips for carbon steel razor blades IS 9476: 1980
473 Specification for Cold-rolled Steel Strips For Springs IS 2507: 1975
474 Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3kV Up to and Including 33kV IS 9968 (Part 2):2002
475 Specification for Ferronickel IS 4409 : 2023
476 Specification for Flexible Cables for Miners Cap-Lamps IS 2593:1984
477 Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement IS 1566:1982
478 Specification for High Tensile Steel Bars used in Pre-stressed Concrete IS 2090:1983
479 Specification for Hot rolled steel strip (bailing) IS 1029 : 1970
480 Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate IS 2385 : 1977
481 Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry IS 4882: 1979
482 Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws IS 2255: 1977
483 Specification for Mild Steel Wire, Cold Heading Quality IS 1673: 1984
484 Specification for Phthalic Anhydride, Technical IS 5158: 1987
485 Specification for Pressure sensitive adhesive insulating tapes for electrical purposes IS 7809 (Part3/ Sec1): 1986
486 Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100V IS 1554:Part 1:1988 (Reaffirmed Year : 2020 )
487 Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11kV IS 1554(Part 2):1988
488 Specification for Shot Firing Cables (for use other than in sharts) IS 5950:1984
489 Specification for Steel For Electrically Welded Round Link Chains IS 6967: 1973
490 Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension IS 3431: 1982
491 Specification for Steel Wire ( up to 20 mm ) for the manufacture of cold-forged rivets IS 7557: 1982
492 Specification for Steel Wire for Needles IS 9962: 1981
493 Specification for Steel Wire for spokes IS 6902: 1973
494 Specification for Steel Wire for Staples, Pins and Clips IS 4224: 1972
495 Specification for Steel Wire for Umbrella Ribs IS 4223: 1975
496 Specification for Structural steel for construction of hulls of ships IS 3039 : 2024
497 Specification for Thermocouple Compensating Cables IS 8784:1987
498 Spoke Wheel Rims IS 16192 (Part-3):2018
499 Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery IS 10325:2000
500 Square Tins for Solid Products IS 916:2000
501 Stabilized Hydrogen Peroxide IS 2080: 2021
502 Stainless Steel Bars and Flats IS 6603: 2001
503 Stainless Steel Blooms Billets and Slabs for Forging IS 6529:1996
504 Stainless steel butt hinges IS 12817: 2020
505 Stainless Steel Cookware IS 14756 : 2022
506 Stainless Steel for Welding Electrode Core Wire IS 10631:1983
507 Stainless Steel Plate, Sheet and Strip-Specification IS 6911:2017
508 Stainless Steel Sheets and Strips for Utensils IS 5522:2014
509 Stainless Steel Sinks for Domestic Purposes IS 13983:1994
510 Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks IS 15834 : 2022
511 Stainless steel Tower Bolts IS 15833 : 2009
512 Stainless steel tubes for the food and beverage industry IS 6913:1973
513 Stainless Steel wire Rod IS 6527:1995
514 Stainless Steel Wires IS 6528:1995
515 Stationary storage type electric water heaters IS 2082: 2018
516 Steel back flap hinges IS 3843: 1995
517 Steel Billets, Bars and Sections For Boilers IS 2100: 1970
518 Steel Butt Hinges IS 1341:2018
519 Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification IS 8951: 2001
520 Steel Chequered Plates IS 3502:2009
521 Steel Drums (Galvanized and Ungalvanized) IS 2552:1989
522 Steel for hardening and tempering-Specification IS 5517 : 1993
523 Steel for Spring Washers IS 4072: 1975
524 Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-1 Flat Sections-Specification IS 3885-Part-1: 1992
525 Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-2 Rib and Groove Sections-Specification IS 3885-Part- 2: 1992
526 Steel For the Manufacture of Volute And Helical Springs ( for Railway Rolling Stock )-Specification IS 3195: 1992
527 Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications-Specification IS 8052: 2006
528 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes-Specification IS 8952: 1995
529 Steel Pipe Flanges IS 6392 : 2020
530 Steel plates for pressure vessels for intermediate and high temperature service including boilers IS 2002:2009
531 Steel plates for pressure vessels used at moderate and low temperature IS 2041:2009
532 Steel Rivet Bars (Medium and High Tensile) for Structural Purposes IS 1148: 2009
533 Steel tubes for structural purposes IS 1161:2014
534 Steel tubes used for water-wells (upto 200 mm dia) IS 4270:2001
535 Steel Tubes, Tubulars and Other Wrought Steel Fittings Part 1-Steel Tubes IS 1239 (Part 1): 2014
536 Steel Wire for Banding Of Armatures And Rotors Part-2 Specific Requirements for magnetic banding wires IS 8510 (Part II): 1977
537 Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire IS 4454 (Part 1) : 2001
538 Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire IS 4454 (Part 2): 2001
539 Steel Wire for Nipples for Spokes IS 8564: 1977
540 Steel Wire for Reeds IS 8566: 1977
541 Steel Wire Rope for haulage IS 1856:2005
542 Steel Wire Ropes for General Engineering Purposes IS 2266 : 2019
543 Steel Wire Suspension Ropes for Lifts, Elevators and Hoists IS 2365 : 2018
544 Steel Wires for Mechanical Springs Part-4 Stainless Steel Wire IS 4454 (Part 4): 2001
545 Steels for Cold Heading or Cold extrusion application Part-1 Wrought carbon and low alloy steels IS 11169 (Part 1): 2022
546 Steels for cold heading or cold extrusion applications-Specification Part-2 Stainless steel IS 11169 (Part 2): 1989
547 Steels for Die Blocks for Drop Forging IS 5518: 1996
548 Steels for High Temperature Bolting Applications-Specification IS 14331:1995
549 Steels For Piston Pins ( Gudgeon Pins ) IS 11952:1986
550 Steels for Pneumatic Tools IS 5651:1987
551 Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs IS 13352: 1992
552 Stranded steel wire ropes for winding and man-riding haulages in mines IS 1855:2022
553 Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete IS Standard : IS 16644: 2018
554 Structural plywood – Specification IS 10701 : 2012
555 Structural Steel (Ordinary Quality) IS 15911:2010
556 Structural Steel for Building for Structures with improved seismic Resistance IS 15962:2012
557 Structural Weather Resistant Steel IS 11587:1986
558 Styrene (Vinyl Benzene) IS 4105:2023
559 Styrene-Butadiene Rubber Latex IS 11356:2020
560 Sulphate Resisting Portland Cement IS 12330: 1988
561 Super Sulphated Cement IS 6909: 1990
562 Switches for domestic and similar purposes IS 3854: 2023
563 Switch-socket-outlets (non-interlock type) IS 15787: 2008
564 Synthetic Micro-Fibres for use in Cement Based Matrix IS 16481:2020
565 Tactical 3 point sling IS 16725 : 2018
566 Tee and strap hinges IS 206:2010
567 Terephthalic Acid IS 15030:2022
568 Textile-High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers IS 9755 : 2021
569 Textile-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement IS 11652 : 2017
570 Textiles-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials IS 16703: 2017
571 Textiles-Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement IS 16709: 2017
572 Textiles-Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution IS 17399: 2020
573 Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC IS 17505(Part 1): 2021
574 Thermostat Metal Sheet and Strip IS 5478: 1969
575 Tinned Steel Wire for Banding of Armatures And Rotors Part-3 Specific Requirements for non-magnetic banding wires IS 8510 (PartIII): 1977
576 Toluene IS 537:2011
577 Tool Steel Forgings for Metal Forming IS 13387: 1992
578 Tool steels-Specification IS 3748 : 2022
579 Tools for Pressing Part-1 Round Punches with 60 Degrees Conical Head and Straight Shank IS 4296:Part 1:2016
580 Tools for Pressing Part-2 Punches with Cylindrical Head and Straight or Reduced Shank IS 4296:Part 2:2015
581 Tools for Pressing Part-3 Round Punches with 60 Degrees Conical Head and Reduced Shank IS 4296:Part 3:2015
582 Tower Bolts- Ferrous metals IS 204 (Part 1) : 1991
583 Tower Bolts- Non-ferrous metal IS 204 (Part 2) : 1992
584 Transmission Devices –V–Belts endless narrow V-Belts for industrial use IS 14261: 1995
585 Transparent Float Glass IS 14900: 2018
586 Trapezoidal Steel Wire for Springs Washers IS 12262:1988
587 Tungsten filament general service electric lamps (upto 100 W) IS 418: 2004
588 Unalloyed And Alloyed Steel Ingot And Semi-Finished Products For Re-Rolling Purposes IS 14650:2023
589 Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete IS 14268:2022
590 Uncoated stress relieved strand for Pre-stressed concrete IS 6006:2014
591 Unlined moulded rubber boots IS 13995:1995
592 Upholstered composites used for non-domestic furniture IS 15768 : 2008
593 Utility Lighters – Safety Specifications IS/ISO 22702:2018
594 Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders IS 3224: 2021
595 Valve fittings for gas cylinder valves for use with breathing apparatus IS 7302: 2018
596 Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders upto and Including 5-Litre Water Capacity IS 8776: 1988
597 Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders IS 8737: 2017
598 Veneered decorative plywood IS 1328:1996
599 Veneered particle boards IS 3097:2006
600 Vertically cast – iron pressure pipes for water, gas and sewage IS 1537:1976
601 Vinyl Acetate Monomer IS 12345:1988
602 Vinyl Chloride Monomer IS 17442:2020
603 Viscose Staple Fibres IS 17266:2019
604 Water meters (bulk type) IS 2373:1981
605 Water meters (domestic type) IS 779: 1994
606 Water-proof multipurpose rain poncho IS 17286 : 2019
607 Welded and seamless steel dissolved acetylene gas cylinders IS 7312: 2018
608 Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases IS 3196 (Part-4): 2001
609 Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity IS 7142: 1995
610 Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part 1 Cylinders for LPG IS 3196 (Part-1): 2013
611 Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG IS 3196 (Part2): 2006
612 Welding Cables-Specification IS 9857:1990
613 Welding rode and bare electrodes for gas shielded arc welding of structural steel IS 6419 : 1996
614 Wheeled Fire Extinguishers IS 16018:2012
615 Wheels for Passenger Cars IS 9436:2018
616 Wheels or Rims for Trucks and Buses IS 9438:2018
617 White Portland Cement IS 8042: 2015
618 Windshield nets for agriculture and horticulture purpose IS 17356 : 2020
619 Wire Ropes Used in Oil Wells and Oil Well Drilling IS 4521:2001
620 Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels IS 2191 (Part 2): 2022
621 Wooden flush door shutters (cellular and hollow core type) – Plywood face panels IS 2191 (Part 1): 2022
622 Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels IS 2202 (Part 2): 2022
623 Wooden flush door shutters (solid core type) – Plywood face panels IS 2202 (Part-1) :1999
624 Woven Ground covers for Horticulture Application IS 16202 : 2014
625 Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes IS 1284 : 1975
626 Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) IS 733:1983
627 Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications IS 5082:1998
628 Wrought aluminium and aluminium alloy plate for general engineering purposes IS 736:1986
629 Wrought aluminium and aluminium alloy rivet stock for general engineering purposes IS 740:1977
630 Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes IS 737:2008
631 Wrought aluminium and aluminium alloy wire for general engineering purposes IS 739:1992
632 Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes IS 1285:2002
633 Wrought aluminium and aluminium alloys for manufacture of utensils IS 21:1992
634 Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes IS 734:1975
635 Wrought Aluminium Utensils IS 1660:2009
636 Wrought Aluminium Wire for Electrical Purposes IS 2067:1975
637 Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose IS 10773:1995
638 Yoke Type Valve Connection for Small Medical Gas Cylinders IS 3745: 2006

Benefits of BIS ISI Certification

  • BIS/ISI Certification is a mandatory requirement for various product categories in India. It allows manufacturers to legally sell their products in the Indian market, one of the world's largest and fastest-growing consumer markets.
  • Products carrying the BIS/ISI mark are perceived as high quality and safe. This certification instils confidence in consumers, leading to increased sales and brand loyalty.
  • anufacturers who meet BIS/ISI standards demonstrate a commitment to safety and quality. This can reduce their liability in the event of product-related incidents.
  • BIS/ISI Certification can facilitate the acceptance of products in international markets, as it reflects adherence to recognized standards and quality.
  • Complying with BIS/ISI standards ensures manufacturers adhere to Indian regulations. Non-compliance can result in severe legal consequences, making BIS/ISI Certification a necessary requirement.

iKargos.com specializes in guiding manufacturers through the BIS/ISI Certification process. With our expertise, you can navigate the certification process seamlessly, ensuring your products are compliant, reliable and ready for deployment

Documents Required for BIS ISI Certification

  • Main Application Form 
    (Primary factory and product category information)
  • ISI Application Fee 
    (Copy of Remittance / Payment Advice)
  • Copy of Test Report done within a month by internal laboratory 
    (Indicating product compliance with the relevant Indian Standard) 
  • Proof of Manufacturing Unit's Address 
    (Factory License or Tax Registration document specifying the manufacturer's scope)
  • Trade Mark Registration, if available  
    (Copy of Trademark Registration)
  • Certificate from concerned regulatory agencies for manufacturing 
    (If applicable)
  • Product Drawings  
    (As applicable)
  • Current Manufacturing Capacity 
    (Production capacity)
  • Raw Material Details 
    (Component names, supplier names, component quality certifications)
  • Machine Details 
    (Machine names, manufacturers, capacities, quantities)
  • Factory Layout Plan
    (Floor plan and technical layout)
  • Manufacturing Process Details
    (Flowchart of the manufacturing process, including any outsourcing)
  • Packaging Information 
    (Packaging size and quantity, storage facilities)
  • Details of Testing Equipment 
    (Equipment names, sizes, quantities, calibration status, and calibration date)
  • Quality Control (QC) Staff Details 
    (Employee names, qualifications, designations, years of experience)
  • Procedure for Handling Substandard Products
    (After manufacturing)
  • Organizational Chart of the Factory 
    (List of management personnel with names and designations in chart format)
  • Factory Location Map 
    (Showing the distance from the airport and city center)
  • Specific Requirements for Foreign Manufacturers 

Note: Separate application must be submitted for each product/Indian Standard and this applies to each factory location.

SNO. Particular Description List of Required Information
1 Application Form - V download
2 FAQs on Marking on Wheel Rims download
3 Guideline on Plugs and Socket-outlets-IS 1293 download
4 Guidelines on BIS Certification for Footwear Manufacturers download

Fees and Timeline

Fees

For a customized and attractive quotation, please contact us with your product details to Rekha Atri (+91 98118 03136) or Manju Laur (+91 9711994042).

Timeline

The certification process timeline typically takes around 4-6 weeks, Early preparation and collaboration can help manage potential delays, ensuring a smooth and successful certification process.

Process for BIS ISI Certification for Foreign Manufacturer

Step 1:  Application Submission

  • Gather all the necessary documents
  • Submit the application fee along with the documents
  • Allotment of Application Number
  • Application scrutiny within the specified timeframe

Step 2:  Query Raised (If Any)

  • Notification regarding any missing documents or non-compliance
  • Submission of a response within the designated period

Step 3:  Inspection (Audit)

  • Payment of the Inspection/Audit Fee
  • Selection of an Inspecting Officer
  • Scheduling the itinerary based on availability
  • Conducting a 3-man-day inspection of the manufacturing unit to assess the testing facilities

Step 4:  Sample Testing

  • Examination of samples on the factory premises during the audit
  • Sealing and collection of samples to be sent to a BIS-approved Laboratory
  • Receipt of Test Reports by BIS (FMCD)

Step 5:  Grant of License

  • Confirmation of sample passage and notification to pay the Marking Fee and License Fee
  • Issuance of a Letter granting the License

Step 6: Indemnity & PBG

  • Signed Agreement or Indemnity Bond by the Authorized Indian Representative
  • Submission of a Performance Bank Guarantee (PBG) amounting to USD 10,000

Note: Payments should be made in USD to the BIS Account.

 

Process for ISI/BIS Certification for Indian Manufacturer

Option 1

The license issuance process is expected to be completed within 120 days, except for the first all-India case, where it may take 180 days. This timeframe begins from the date of receiving the application, provided that the documentation, unit assessment, and product compliance are satisfactorily established at the first instance during various stages. Here are the steps involved:

Step 1:  Customizing the Manufacturing Unit as per the relevant Indian Standard

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities to meet the Standard's requirements

Step 2: Filing the Application Form

  • Preparing the Internal Test Report of the product according to the relevant IS
  • Compiling all necessary documents
  • Completing the online Application Form
  • Making the online application fee payment directly to BIS
  • Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

Step 3:  Remitting Audit Fees & Travelling Expenses for Inspection

  • Paying the audit fees for inspection
  • Confirming the BIS Inspection Team
  • Coordinating travel, accommodation and boarding for the visiting team

Step 4:  Factory Visit

  • Conducting an assessment of the manufacturing infrastructure, production process, quality control, and testing capabilities during a factory visit
  • Selecting random sample(s) for testing in a BIS Approved Lab allocated by the BIS office

Step 5:  Organizing the Lab Test Report (LTR)

  • Submitting the samples collected by the visiting team to the allocated laboratory, along with the testing fee

Step 6: Closure of Non-Conformity (if any) and Remittance of Official Fees

  • Rectifying any issues pointed out by the inspection team regarding the factory unit's processes
  • Submitting proof of rectification to close non-conformities, if any
  • Paying the annual marking fees (annual license fees) to BIS

Step 7 : Obtaining the BIS (ISI) Certificate

  • The license is granted upon evidence of steps 4 to 6

 

Option 2

The license issuance process is expected to be completed within 30 days from the date of application receipt if the factory visit is satisfactory and the sample conforms to the relevant Indian Standard(s) at the first instance. Here are the steps involved:

Step 1:  Customizing the Manufacturing Unit as per the relevant Indian Standard

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities to meet the Standard's requirements

Step 2:  Sample Testing 

  • Arrange the required certificate for raw material (MTC)
  • Get the product sample tested in BIS recognized testing lab

Step 3:  Filing the Application Form

  • Preparing the Internal Test Report of the product, following the reference test report provided by BIS for your guidance
  • Compiling all necessary documents
  • Completing the online Application Form
  • Making the online application fee payment directly to BIS
  • Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

Step 4:  Remitting Audit Fees & Travelling Expenses for Inspection

  • Paying the audit fees for inspection
  • Confirming the BIS Inspection Team
  • Coordinating travel, accommodation and boarding for the visiting team

Step 5:  Factory visit

  • Conducting an assessment of the manufacturing infrastructure, production process, quality control and testing capabilities during a factory visit
  • Selecting random sample(s) for testing in a BIS Approved Lab allocated by the BIS office

Step 6:  Submitting the Sample for Testing

  • Submitting the sample to the allocated lab and paying the testing fee
  • Receiving an acknowledgement from the lab and submitting it to the BIS office

Step 7: Obtaining the BIS (ISI) Certificate

  • Paying the annual marking fees (annual license fees) to BIS
  • BIS will issue the ISI Certificate

Step 8: Closure of Non-Conformity (if any)

  • Rectifying any issues pointed out by the inspection team regarding the factory unit's processes

 

Important Note:

In the case of non-conformity with the sample(s) drawn during the factory visit under Option 2, the license will be suspended immediately. The licensee must take corrective actions and inform the Bureau. They must also confirm their readiness to provide new samples manufactured after taking corrective actions. The suspension will only be revoked based on conforming Testing Reports of the fresh samples from a BIS Recognized Testing Laboratory.

If the fresh sample tested by the Bureau for revoking the suspension exhibits non-conformity in laboratory testing, or if the licensee does not report corrective actions taken and does not provide improved samples within 30 days of the suspension date, the license will be considered for cancellation

Frequently Asked Questions

Products such as electrical appliances, cement, steel, household items, automotive components, and many others fall under the mandatory ISI Certification scheme.

The ISI Certification is valid for two years. After that, needs to renew.

Yes, imported products falling under the mandatory ISI Certification scheme need to be certified before they can be sold in the Indian market.

Yes, depending on your product, it may require multiple types of ISI Certification if it falls under various categories or standards.
Connect with our experts
  • +91
  • +1
  • +42
  • +86
or
whatsapp +919811803136
|
+919711994042

products cover under this certificate

See all products
Connect with our experts
  • +91
  • +1
  • +42
  • +86
or
whatsapp +919811803136
|
+919711994042